Categories
Entertainment

Sony ULT Wear headphones review: Brain-shaking bass

[ad_1]

Sony’s Extra Bass line of headphones has given listeners an added dose of low-end tone for years, and was generally cheaper than its high-end 1000X cans. The company is still keen on offering brain-rattling bass to those who want it, but the Extra Bass moniker and its confusing alpha-numeric product names are gone (more to come on that change). Today, Sony is introducing ULT Power Sound, a feature it’s calling the “ultimate step into the evolution” of its portable audio gear.

ULT Power Sound will also be available on Bluetooth speakers of various sizes, but the first headphones to feature the new audio direction are the ULT Wear ($200). A direct replacement for the WH-B910, the ULT Wear contains 40mm drivers that Sony says are specifically designed for deeper bass. If the stock tuning isn’t enough, there’s a ULT button for two more levels of low-end boost. Plus, the company crammed in some of its best features from more-expensive headphones: the V1 audio chip, 30-hour battery life, Quick Attention mode, 360 Reality Audio with head tracking and more.

Sony

Sony’s ULT Wear headphones are a better implementation of bass boost than previous models along with considerable updates to ANC, features and overall design.

Pros

  • Refined design
  • Great sound most of the time
  • Handy features
  • Improved ANC
Cons

  • ULT boost can be too much
  • Some WH-1000XM5 features aren’t available
  • Sound gets muddy with some genres

$200 at Amazon

The first thing I noticed about the ULT Wear is its design. These headphones don’t immediately strike me as less-than-premium cans. The matte white finish on my review unit helps mask the mostly plastic construction which looked cheap on previous products like the WH-CH720N. It’s definitely a more refined aesthetic than the WH-XB910 that’s being replaced. There are certainly some nods to the premium 1000X line in a few areas, like the curves of the ear cups and headband.

Sony decided on a mix of physical and touch controls for the ULT Wear, which is another way it’s bridging the gap between its most affordable and most expensive headphones. On the edge of the left ear cup is a power/pairing button and a control for cycling between active noise cancellation (ANC) and ambient sound modes. Further up along the bottom is a third button for ULT bass boost. This item switches between off, ULT 1 (deep bass) and ULT 2 (more powerful sound with deep bass). Over on the right, the outside of the ear cup has a touch panel that you can tap and swipe on for playback controls, volume adjustments and calls.

As the ULT Wear sits in the middle of Sony’s headphone lineup, it has a few of the handy features from the 1000X line that the company’s cheaper options don’t employ. For example, placing your open hand over the right ear cup activates Quick Attention mode that lowers the volume so you can respond to a co-worker or grab your cortado without pausing your tunes. Adaptive Sound Control is here as well: Sony’s long-standing tool that automatically adjusts the headphone’s settings based on your activity or location. General niceties like multipoint Bluetooth and wear detection are present too. The convenient Speak-to-Chat function from more-recent 1000X headphones isn’t available though, which is a considerable omission in terms of overall utility.

Controls detail of a set of white headphones with 3.5mm jack and USB-C port near power, ANC and ULT buttons.Controls detail of a set of white headphones with 3.5mm jack and USB-C port near power, ANC and ULT buttons.

Photo by Billy Steele/Engadget

Bass reigns supreme for the ULT Wear’s tuning and you certainly get a heavy dose of it. Those new specifically tuned drivers muster a lot of low-end thump before you even start exploring the ULT boosts. The out-of-the-box level was good enough for me for most genres, although the overall sound can get muddy with more chaotic styles like metal and some synth-heavy electronic tracks. For the most part though, the stock bass provides depth and range that complements full mids and cutting highs.

On Bayside’s There Are Worse Things Than Being Alive, there’s a thundering kick drum to drive the punk-tinged indie rock tunes, but the texture of the crunchy distorted guitars stands out and vocals cut through clearly. Plus, you can add Sony’s DSEE upscaling through its app, a software trick that’s designed to recover sonic elements lost to compression. And if you have access to 360 Reality Audio content, the ULT Wear supports head-tracking so that sounds stay put when you move. This offers a more realistic experience since the immersive audio in this format would otherwise move with your head.

When you hop into the ULT boost modes, things are a mixed bag. Sony has done bass boost better than most other companies here, as songs are still actually listenable across musical styles rather than just becoming a muffled mess. ULT 1, the option for deeper bass, is the best in my opinion. You don’t lose much detail using it and things like kick drums are still punchy throughout. Hip-hop tracks are a better canvas, with songs like Killer Mike’s “Down By Law” blasting bombastic, yet finessed, amplified bass. His album Michael is one of the better-sounding selections I tested with ULT 1 enabled.

ULT 2, a setting for more powerful sound alongside even deeper bass, isn’t great. During my tests, I didn’t find a single track where I thought it sounded good across driving low-end styles like hip-hop and EDM. It sounds like you’re standing in front of the subwoofer at a concert where bass is most prominent and everything else gets drowned out. And while I’m sure some people enjoy that extent of brain rattling, it’s not what I’m looking for.

Headband and ear cup detail of a set of white headphones showing speaker grille design.Headband and ear cup detail of a set of white headphones showing speaker grille design.

Photo by Billy Steele/Engadget

Sony improved ANC from the WH-XB910 by installing its V1 audio processor from the 1000X series in the ULT Wear. The result is noticeably improved noise-canceling performance for a set of $200 headphones, but you shouldn’t expect distraction-blocking as robust as what the WH-1000XM5 offers. It’s good in most situations, but in some scenarios it simply dulls the roar. The ULT Wear does, however, do a decent job with human voices – much better than the Sennheiser Accentum Plus I recently reviewed.

The company didn’t go out of its way to discuss call quality on the ULT Wear, but the performance here is slightly above average. It’s not pristine, but it also doesn’t have the obvious speaker phone sound most headphones do. Low-to-mid-volume background noise is also dealt with nicely. Ambient sound mode on the ULT Wear is more natural that what most headphones offer, save for the AirPods Max. You can hear a good amount of your own voice, so you’re free to speak at a normal volume during calls. And any sounds from your surroundings come through clear, so you don’t have to worry about not hearing alerts or announcements.

Sony says you can expect up to 30 hours of battery life with ANC on or up to 50 hours with it off. The company doesn’t specify if either of the ULT modes impact longevity, and I didn’t have them on long enough to tell. After 30 hours of use with ANC on, except for several instances of ambient sound for calls, Sony’s app was showing 18 percent battery left. Both audiomodes were used at around 50-60 percent volume, and trust me, that’s plenty loud here.

If you crave a deep bassy thump that most headphones haven’t been able to deliver, the ULT Wear does a much better job boosting low-end tone than Sony’s previous efforts. The sound out of the box is certainly boomy, but not at the cost of any detail, and the company gives you the option to add two more servings of bass when you crave it. These won’t be for everyone as a lot of people will prefer the more even-handed tuning of Sennheiser’s Accentum Plus in the $200 range. However, Sony has done well to dress up a more affordable set of headphones as a premium product, in terms of both looks and features.

The ULT Wear headphones are available in black, white and green color options for $200. Sony says they’ll start shipping sometime this spring.

[ad_2]

Source Article Link

Categories
Entertainment

A four-pack of Chipolo One Bluetooth trackers is on sale for $60 right now

[ad_1]

Bluetooth trackers are handy little things that can help you find valuables after misplacing them. Our pick for the is the Chipolo One, and a four-pack has dropped to a record low price. The bundle (which usually costs $75) is , which makes each tracker just $15. Alternatively, you can buy a single tracker (usually $25).

Chipolo

A four-pack of Chipolo One Bluetooth trackers has dropped to a record low price of $60.

$60 at Amazon

The Chipolo One can’t really measure up to the crowd-sourced finding network of AirTags or Tile trackers, so it’s perhaps not the best option for monitoring the location of your luggage while traveling. However, it does a more than capable job of helping you find items around the house. It has the loudest ring of all the trackers we’ve tested, for one thing, and there was no delay between pressing a button in an app and hearing the Chipolo One trill away.

The One can be easy to spot, since it’s a colorful plastic disc. It’s fairly hardy too, since it has IPX5-rated splash resistance and a two-year battery life (the battery is replaceable). One other feature in the One’s favor is that it’s compatible with both iOS and Android, and we found it straightforward to pair with an iPhone and Samsung Galaxy phone.

The aspect of the One that particularly impressed us was its separation alerts. Once you get around 350 feet away from the tracker, you’ll get an alert on your phone asking if you might have left an item somewhere. Through your maps app, Chipolo can guide you back to the location where your phone and the One were last in contact. Of course, you can ring the tracker once you’re close by to help you find it.

Follow @EngadgetDeals on Twitter and subscribe to the Engadget Deals newsletter for the latest tech deals and buying advice.



[ad_2]

Source Article Link

Categories
Entertainment

Prime members can play Fallout 3 and New Vegas on Luna for the next six months

[ad_1]

Fallout games are having a moment in the wake of glowing reviews for the new TV series adaptation on Prime Video. Amazon has added two of the series’ best games as freebies for Prime members on Luna, its cloud streaming service. Fallout 4 is also getting some love, as Bethesda said it will drop the PS5 and Xbox Series X/S update for the 2015 game on April 25.

Amazon Prime members can play Fallout 3 and Fallout: New Vegas on Amazon Luna for the next six months at no extra charge. Like other cloud streaming services, Luna requires a stable and low-latency internet connection since the games you play are processed on remote servers. Amazon recommends a network that can sustain at least 10Mbps for 1080p quality. An ethernet connection works best, but if you’re on Wi-Fi, using the 5GHz band is preferable if your router supports it.

They join Fallout 76, already announced as an Amazon Prime Gaming free game for April. As long as you claim it this month, you can download and keep it forever. It’s redeemable for both Xbox and PC. In addition, the game has a free-play week for all platforms. From Thursday through April 18, you can play Fallout 76 for free on PlayStation, Xbox and Steam. You only need to download the game and sign in with a Bethesda account.

Promotional screenshot for the next-gen console update for Fallout 4. Two (blue-suit-wearing) people stand armed with guns in a video game wasteland. Crumbling buildings and a desert landscape in the background.Promotional screenshot for the next-gen console update for Fallout 4. Two (blue-suit-wearing) people stand armed with guns in a video game wasteland. Crumbling buildings and a desert landscape in the background.

Bethesda

The long-delayed big console update for Fallout 4 finally arrives for PS5 and Xbox Series X/S on April 25. The “next-gen” (now current-gen, if we’re being technical) version lets you choose between Performance and Quality modes for prioritizing speed or spectacle. It also supports 60fps and higher resolutions alongside stability improvements and bug fixes. The stability fixes will also arrive in a Fallout 4 update for PS4 and Xbox One consoles to provide a more dependable experience for older hardware users.

The Fallout TV series is damn good — and possibly the second-best gaming adaptation behind The Last of Us. The show starts with a bang and reels you in with magnetic characters and alluring visuals. “Fallout is more than just a video game adaptation,” Engadget’s Sam Rutherford wrote in his review. “It’s a really good show in its own right — an apocalyptically good one at that.”

Fallout is now streaming on Prime Video. It stars Ella Purnell (Yellowjackets) as Lucy, Aaron Clifton Moten (Father Stu) as Maximums, Kyle MacLachlan (Twin Peaks) as Hank and the scene-stealing master of ornery characters, Walton Goggins (Justified), as The Ghoul.

This article contains affiliate links; if you click such a link and make a purchase, we may earn a commission.

[ad_2]

Source Article Link

Categories
Entertainment

Pick up one of our favorite Anker USB-C hubs for only $40

[ad_1]

One of our favorite Anker USB-C hubs is on sale for $40 via Amazon. The Anker 555 is typically $50, so this is a discount of 20 percent. This is one of the best hubs money can buy, even at its original price. It made our list of the best MacBook accessories, but it’s a mighty fine addition to any PC.

Anker

This is a discount of 20 percent for the well-reviewed hub. 

$40 at Amazon

The Anker 555 USB-C hub gives you eight ports to connect just about anything under the sun. There’s two USB-A ports, one HDMI port, SD and microSD card slots, one Ethernet jack and two USB-C ports. One of the USB-C ports provides 85W of power to charge various devices, including laptop computers.

It can handle up to 10 Gbps file transfers and can connect to a 4K/60Hz monitor via the HDMI slot. It’s also extremely portable, making it easy to just throw in a bag until you need it. To that end, it ships with a nice little travel pouch. We wrote that the Anker 555 “has enough power and versatility to be the only laptop hub you need.”

The sale extends to other Anker hubs, if the 555 doesn’t do it for you. The simply-named Anker USB C Hub also costs $40, which is a discount of 15 percent. It comes with 10 ports, including 4K HDMI, 1080p VGA, USB-C, USB-A, Ethernet and a 100W USB-C charging port. There’s also a slot for SD cards. The transfer speed is a bit slower here, however, at 5 Gbps.

Finally, there’s the Anker 565. This hub costs $59 as part of this sale, which is a massive discount of 41 percent. It kicks things up a notch, with 11 available ports. These include a 10 Gbps USB-C data port, a 10 Gbps USB-A data port, a 4K HDMI port, a 4K DisplayPort, a 100W USB-C input port for charging devices, two 480 Mbps USB-A data ports, an Ethernet port, an AUX port and microSD card slots. It also allows for multi-monitor setups, thanks to the aforementioned DisplayPort and HDMI port options.

Follow @EngadgetDeals on Twitter and subscribe to the Engadget Deals newsletter for the latest tech deals and buying advice.



[ad_2]

Source Article Link

Categories
Entertainment

The Amazon Fire TV Stick 4K Max is only $40 right now

[ad_1]

The Fire TV Stick 4K Max streaming device is on sale for $40. That’s a record low for Amazon’s top-of-the-line streaming stick, which usually costs $60.

The Amazon Fire TV Stick 4K Max plugs into your TV’s HDMI port to access all the top streaming services, including (among many others) Netflix, Hulu, Disney+, Max, Apple TV+ and, of course, Amazon’s Prime Video.

Amazon

The streaming stick has a 2GHz quad-core processor to help make navigation zippy and smooth. The device’s 16GB of storage is double that of Amazon’s cheaper models so that you can download plenty of apps and offline content without worries.

The 4K Max supports Dolby Vision, HDR10+ and Dolby Atmos audio for a dynamic viewing experience and more immersive audio (with compatible TVs and speakers). It also supports Wi-Fi 6E for smoother streaming with fewer hiccups if your router also supports it.

It includes Amazon’s latest Alexa Voice Remote. The accessory has four pre-programmed shortcut buttons (for apps like Netflix and Prime Video). It supports Alexa, so you can use it to control the Fire TV Stick 4K Max and other Alexa-compatible smart home devices from your couch.

If you’d prefer to save money over having Amazon’s highest-end model, the Fire TV Stick Lite is also on sale. It’s Engadget’s pick for the best budget streaming stick. The device doesn’t support 4K, so this is only a good option if your television’s resolution is 1080p or lower. (However, it does support HDR.) Usually $30, you can get the entry-level model today for $20.

For those who want an upgraded audio setup, the Fire TV Soundbar is $20 off. It supports virtual surround sound with DTS Virtual:X and Dolby Audio. It hooks up to your TV’s HDMI port and only takes up 24 inches (with a 2.5-inch height) on your entertainment center. The device works with anything connected to your TV, not only the devices in Amazon’s streaming devices. As an alternative, you can connect it to other devices via Bluetooth. Typically $120, the Fire TV Soundbar is available today for $100.

Follow @EngadgetDeals on Twitter and subscribe to the Engadget Deals newsletter for the latest tech deals and buying advice.



[ad_2]

Source Article Link

Categories
Entertainment

Sony’s new ULT Bluetooth speakers are bringing back the ’90s bass boost button

[ad_1]

Sony just announced a trio of new speakers in a new line of audio products called the ULT Power Series. This is an attempt by the company to reduce some of the clutter involved with its naming conventions, so and XE-Series products. Both lines are being wrapped up into the ULT Power Series branding. To suit this new branding, each of the following speakers include something called the ULT button, which provides a bass boost.

The ULT Field 1 is your standard portable Bluetooth speaker. It’s compact and comes in a variety of colors, including black, white, gray and orange. The battery lasts around 12 hours per charge and the casing is IP67 water resistant, dustproof and shockproof. Like many of these ultra-portable Bluetooth speakers, the design lets users stand it on its end or lay it on its side, to make use of space. There’s also a built-in mic for hands-free calling. This speaker costs $130 and will be available later this spring at major retail outlets.

Two Sony speakers.Two Sony speakers.

Sony

The ULT Field 7 is basically a beefier version of the Field 1. It’s bigger, though still portable, and includes two dedicated ULT buttons. One provides deeper bass in the lower frequency range and the other brings a powerful, punchy bass. There’s also plenty of ambient LED lighting that synchronizes with the music.

The battery lasts 30 hours, which is a fantastic metric, and includes quick-charging capabilities. It’s also being advertised as a karaoke machine, thanks to the built-in microphone port. Finally, Sony says people can string together up to 100 of these things to make a cacophony of noise that’ll really annoy the pants off of their neighbors. Those neighbors, however, are likely to live in a glorious mansion, as just one Field 7 costs $500. They go on sale later this spring.

A Sony speaker.A Sony speaker.

Sony

The ULT Tower 10 is, as the name suggests, a Bluetooth tower speaker intended for living spaces. This speaker wirelessly connects to stereo systems and TVs for enhanced audio and includes the same two ULT bass boost buttons found with the Field 7. There’s also a sound optimization feature that detects local noise and adjusts the settings to accommodate the surroundings.

The speaker boasts omni-directional synchronized lighting, which Sony says “makes listeners feel like they are at a music festival.” There are two microphone inputs for belting out karaoke duets and the speaker actually ships with one wireless mic. Listeners can also connect up to 100 compatible speakers at once, including the Field 7. This is one expensive tower speaker, however, so it’ll set you back $1,200 when it releases later in the season.

[ad_2]

Source Article Link

Categories
Entertainment

The Humane AI Pin is the solution to none of technology’s problems

[ad_1]

I’ve found myself at a loss for words when trying to explain the Humane AI Pin to my friends. The best description so far is that it’s a combination of a wearable Siri button with a camera and built-in projector that beams onto your palm. But each time I start explaining that, I get so caught up in pointing out its problems that I never really get to fully detail what the AI Pin can do. Or is meant to do, anyway.

Yet, words are crucial to the Humane AI experience. Your primary mode of interacting with the pin is through voice, accompanied by touch and gestures. Without speaking, your options are severely limited. The company describes the device as your “second brain,” but the combination of holding out my hand to see the projected screen, waving it around to navigate the interface and tapping my chest and waiting for an answer all just made me look really stupid. When I remember that I was actually eager to spend $700 of my own money to get a Humane AI Pin, not to mention shell out the required $24 a month for the AI and the company’s 4G service riding on T-Mobile’s network, I feel even sillier.

What is the Humane AI Pin?

In the company’s own words, the Humane AI Pin is the “first wearable device and software platform built to harness the full power of artificial intelligence.” If that doesn’t clear it up, well, I can’t blame you.

There are basically two parts to the device: the Pin and its magnetic attachment. The Pin is the main piece, which houses a touch-sensitive panel on its face, with a projector, camera, mic and speakers lining its top edge. It’s about the same size as an Apple Watch Ultra 2, both measuring about 44mm (1.73 inches) across. The Humane wearable is slightly squatter, though, with its 47.5mm (1.87 inches) height compared to the Watch Ultra’s 49mm (1.92 inches). It’s also half the weight of Apple’s smartwatch, at 34.2 grams (1.2 ounces).

Humane

Not only is the Humane AI Pin slow, finicky and barely even smart, using it made me look pretty dumb. As it stands, the device doesn’t do enough to justify its $700 and $24-a-month price.

Pros

  • Novel projector beams a “screen” onto your palm
  • Effective interpreter mode
  • Thoughtful design touches
Cons

  • Runs hot
  • Unreliable
  • Slow
  • Projected screen relies on tiresome and finicky gestures to navigate
  • Expensive for what it does
  • Short battery life

$699 at Humane

The top of the AI Pin is slightly thicker than the bottom, since it has to contain extra sensors and indicator lights, but it’s still about the same depth as the Watch Ultra 2. Snap on a magnetic attachment, and you add about 8mm (0.31 inches). There are a few accessories available, with the most useful being the included battery booster. You’ll get two battery boosters in the “complete system” when you buy the Humane AI Pin, as well as a charging cradle and case. The booster helps clip the AI Pin to your clothes while adding some extra hours of life to the device (in theory, anyway). It also brings an extra 20 grams (0.7 ounces) with it, but even including that the AI Pin is still 10 grams (0.35 ounces) lighter than the Watch Ultra 2.

That weight (or lack thereof) is important, since anything too heavy would drag down on your clothes, which would not only be uncomfortable but also block the Pin’s projector from functioning properly. If you’re wearing it with a thinner fabric, by the way, you’ll have to use the latch accessory instead of the booster, which is a $40 plastic tile that provides no additional power. You can also get the stainless steel clip that Humane sells for $50 to stick it onto heavier materials or belts and backpacks. Whichever accessory you choose, though, you’ll place it on the underside of your garment and stick the Pin on the outside to connect the pieces.

Humane AI PinHumane AI Pin
Hayato Huseman for Engadget

How the AI Pin works

But you might not want to place the AI Pin on a bag, as you need to tap on it to ask a question or pull up the projected screen. Every interaction with the device begins with touching it, there is no wake word, so having it out of reach sucks.

Tap and hold on the touchpad, ask a question, then let go and wait a few seconds for the AI to answer. You can hold out your palm to read what it said, bringing your hand closer to and further from your chest to toggle through elements. To jump through individual cards and buttons, you’ll have to tilt your palm up or down, which can get in the way of seeing what’s on display. But more on that in a bit.

There are some built-in gestures offering shortcuts to functions like taking a picture or video or controlling music playback. Double tapping the Pin with two fingers will snap a shot, while double-tapping and holding at the end will trigger a 15-second video. Swiping up or down adjusts the device or Bluetooth headphone volume while the assistant is talking or when music is playing, too.

Side view of the Humane AI Pin held in mid-air in front of some green foliage and a red brick building.Side view of the Humane AI Pin held in mid-air in front of some green foliage and a red brick building.
Cherlynn Low for Engadget

Each person who orders the Humane AI Pin will have to set up an account and go through onboarding on the website before the company will ship out their unit. Part of this process includes signing into your Google or Apple accounts to port over contacts, as well as watching a video that walks you through those gestures I described. Your Pin will arrive already linked to your account with its eSIM and phone number sorted. This likely simplifies things so users won’t have to fiddle with tedious steps like installing a SIM card or signing into their profiles. It felt a bit strange, but it’s a good thing because, as I’ll explain in a bit, trying to enter a password on the AI Pin is a real pain.

Talking to the Humane AI Pin

The easiest way to interact with the AI Pin is by talking to it. It’s supposed to feel natural, like you’re talking to a friend or assistant, and you shouldn’t have to feel forced when asking it for help. Unfortunately, that just wasn’t the case in my testing.

When the AI Pin did understand me and answer correctly, it usually took a few seconds to reply, in which time I could have already gotten the same results on my phone. For a few things, like adding items to my shopping list or converting Canadian dollars to USD, it performed adequately. But “adequate” seems to be the best case scenario.

Sometimes the answers were too long or irrelevant. When I asked “Should I watch Dream Scenario,” it said “Dream Scenario is a 2023 comedy/fantasy film featuring Nicolas Cage, with positive ratings on IMDb, Rotten Tomatoes and Metacritic. It’s available for streaming on platforms like YouTube, Hulu and Amazon Prime Video. If you enjoy comedy and fantasy genres, it may be worth watching.”

Setting aside the fact that the “answer” to my query came after a lot of preamble I found unnecessary, I also just didn’t find the recommendation satisfying. It wasn’t giving me a straight answer, which is understandable, but ultimately none of what it said felt different from scanning the top results of a Google search. I would have gleaned more info had I looked the film up on my phone, since I’d be able to see the actual Rotten Tomatoes and Metacritic scores.

To be fair, the AI Pin was smart enough to understand follow-ups like “How about The Witch” without needing me to repeat my original question. But it’s 2024; we’re way past assistants that need so much hand-holding.

A screenshot showing the data stored on the Humane AI Pin's web portal. At the top is the header A screenshot showing the data stored on the Humane AI Pin's web portal. At the top is the header

We’re also past the days of needing to word our requests in specific ways for AI to understand us. Though Humane has said you can speak to the pin “naturally,” there are some instances when that just didn’t work. First, it occasionally misheard me, even in my quiet living room. When I asked “Would I like YouTuber Danny Gonzalez,” it thought I said “would I like YouTube do I need Gonzalez” and responded “It’s unclear if you would like Dulce Gonzalez as the content of their videos and channels is not specified.”

When I repeated myself by carefully saying “I meant Danny Gonzalez,” the AI Pin spouted back facts about the YouTuber’s life and work, but did not answer my original question.

That’s not as bad as the fact that when I tried to get the Pin to describe what was in front of me, it simply would not. Humane has a Vision feature in beta that’s meant to let the AI Pin use its camera to see and analyze things in view, but when I tried to get it to look at my messy kitchen island, nothing happened. I’d ask “What’s in front of me” or “What am I holding out in front of you” or “Describe what’s in front of me,” which is how I’d phrase this request naturally. I tried so many variations of this, including “What am I looking at” and “Is there an octopus in front of me,” to no avail. I even took a photo and asked “can you describe what’s in that picture.”

Every time, I was told “Your AI Pin is not sure what you’re referring to” or “This question is not related to AI Pin” or, in the case where I first took a picture, “Your AI Pin is unable to analyze images or describe them.” I was confused why this wasn’t working even after I double checked that I had opted in and enabled the feature, and finally realized after checking the reviewers’ guide that I had to use prompts that started with the word “Look.”

Look, maybe everyone else would have instinctively used that phrasing. But if you’re like me and didn’t, you’ll probably give up and never use this feature again. Even after I learned how to properly phrase my Vision requests, they were still clunky as hell. It was never as easy as “Look for my socks” but required two-part sentences like “Look at my room and tell me if there are boots in it” or “Look at this thing and tell me how to use it.”

A screenshot showing recent queries with the Humane AI Pin. The top of the page says A screenshot showing recent queries with the Humane AI Pin. The top of the page says

When I worded things just right, results were fairly impressive. It confirmed there was a “Lysol can on the top shelf of the shelving unit” and a “purple octopus on top of the brown cabinet.” I held out a cheek highlighter and asked what to do with it. The AI Pin accurately told me “The Carry On 2 cream by BYBI Beauty can be used to add a natural glow to skin,” among other things, although it never explicitly told me to apply it to my face. I asked it where an object I was holding came from, and it just said “The image is of a hand holding a bag of mini eggs. The bag is yellow with a purple label that says ‘mini eggs.’” Again, it didn’t answer my actual question.

Humane’s AI, which is powered by a mix of OpenAI’s recent versions of GPT and other sources including its own models, just doesn’t feel fully baked. It’s like a robot pretending to be sentient — capable of indicating it sort of knows what I’m asking, but incapable of delivering a direct answer.

My issues with the AI Pin’s language model and features don’t end there. Sometimes it just refuses to do what I ask of it, like restart or shut down. Other times it does something entirely unexpected. When I said “Send a text message to Julian Chokkattu,” who’s a friend and fellow AI Pin reviewer over at Wired, I thought I’d be asked what I wanted to tell him. Instead, the device simply said OK and told me it sent the words “Hey Julian, just checking in. How’s your day going?” to Chokkattu. I’ve never said anything like that to him in our years of friendship, but I guess technically the AI Pin did do what I asked.

Humane AI PinHumane AI Pin
Hayato Huseman for Engadget

Using the Humane AI Pin’s projector display

If only voice interactions were the worst thing about the Humane AI Pin, but the list of problems only starts there. I was most intrigued by the company’s “pioneering Laser Ink display” that projects green rays onto your palm, as well as the gestures that enabled interaction with “onscreen” elements. But my initial wonder quickly gave way to frustration and a dull ache in my shoulder. It might be tiring to hold up your phone to scroll through Instagram, but at least you can set that down on a table and continue browsing. With the AI Pin, if your arm is not up, you’re not seeing anything.

Then there’s the fact that it’s a pretty small canvas. I would see about seven lines of text each time, with about one to three words on each row depending on the length. This meant I had to hold my hand up even longer so I could wait for notifications to finish scrolling through. I also have a smaller palm than some other reviewers I saw while testing the AI Pin. Julian over at Wired has a larger hand and I was downright jealous when I saw he was able to fit the entire projection onto his palm, whereas the contents of my display would spill over onto my fingers, making things hard to read.

It’s not just those of us afflicted with tiny palms that will find the AI Pin tricky to see. Step outside and you’ll have a hard time reading the faint projection. Even on a cloudy, rainy day in New York City, I could barely make out the words on my hands.

When you can read what’s on the screen, interacting with it might make you want to rip your eyes out. Like I said, you’ll have to move your palm closer and further to your chest to select the right cards to enter your passcode. It’s a bit like dialing a rotary phone, with cards for individual digits from 0 to 9. Go further away to get to the higher numbers and the backspace button, and come back for the smaller ones.

This gesture is smart in theory but it’s very sensitive. There’s a very small range of usable space since there is only so far your hand can go, so the distance between each digit is fairly small. One wrong move and you’ll accidentally select something you didn’t want and have to go all the way out to delete it. To top it all off, moving my arm around while doing that causes the Pin to flop about, meaning the screen shakes on my palm, too. On average, unlocking my Pin, which involves entering a four-digit passcode, took me about five seconds.

On its own, this doesn’t sound so bad, but bear in mind that you’ll have to re-enter this each time you disconnect the Pin from the booster, latch or clip. It’s currently springtime in New York, which means I’m putting on and taking off my jacket over and over again. Every time I go inside or out, I move the Pin to a different layer and have to look like a confused long-sighted tourist reading my palm at various distances. It’s not fun.

Of course, you can turn off the setting that requires password entry each time you remove the Pin, but that’s simply not great for security.

Though Humane says “privacy and transparency are paramount with AI Pin,” by its very nature the device isn’t suitable for performing confidential tasks unless you’re alone. You don’t want to dictate a sensitive message to your accountant or partner in public, nor might you want to speak your Wi-Fi password out loud.

That latter is one of two input methods for setting up an internet connection, by the way. If you choose not to spell your Wi-Fi key out loud, then you can go to the Humane website to type in your network name (spell it out yourself, not look for one that’s available) and password to generate a QR code for the Pin to scan. Having to verbally relay alphanumeric characters to the Pin is not ideal, and though the QR code technically works, it just involves too much effort. It’s like giving someone a spork when they asked for a knife and fork: good enough to get by, but not a perfect replacement.

The Humane AI Pin held in mid-air in front of some bare trees and a street with red brick buildings on it.The Humane AI Pin held in mid-air in front of some bare trees and a street with red brick buildings on it.
Cherlynn Low for Engadget

The Humane AI Pin’s speaker

Since communicating through speech is the easiest means of using the Pin, you’ll need to be verbal and have hearing. If you choose not to raise your hand to read the AI Pin’s responses, you’ll have to listen for it. The good news is, the onboard speaker is usually loud enough for most environments, and I only struggled to hear it on NYC streets with heavy traffic passing by. I never attempted to talk to it on the subway, however, nor did I obnoxiously play music from the device while I was outside.

In my office and gym, though, I did get the AI Pin to play some songs. The music sounded fine — I didn’t get thumping bass or particularly crisp vocals, but I could hear instruments and crooners easily. Compared to my iPhone 15 Pro Max, it’s a bit tinny, as expected, but not drastically worse.

The problem is there are, once again, some caveats. The most important of these is that at the moment, you can only use Tidal’s paid streaming service with the Pin. You’ll get 90 days free with your purchase, and then have to pay $11 a month (on top of the $24 you already give to Humane) to continue streaming tunes from your Pin. Humane hasn’t said yet if other music services will eventually be supported, either, so unless you’re already on Tidal, listening to music from the Pin might just not be worth the price. Annoyingly, Tidal also doesn’t have the extensive library that competing providers do, so I couldn’t even play songs like Beyonce’s latest album or Taylor Swift’s discography (although remixes of her songs were available).

Though Humane has described its “personic speaker” as being able to create a “bubble of sound,” that “bubble” certainly has a permeable membrane. People around you will definitely hear what you’re playing, so unless you’re trying to start a dance party, it might be too disruptive to use the AI Pin for music without pairing Bluetooth headphones. You’ll also probably get better sound quality from Bose, Beats or AirPods anyway.

The Humane AI Pin camera experience

I’ll admit it — a large part of why I was excited for the AI Pin is its onboard camera. My love for taking photos is well-documented, and with the Pin, snapping a shot is supposed to be as easy as double-tapping its face with two fingers. I was even ready to put up with subpar pictures from its 13-megapixel sensor for the ability to quickly capture a scene without having to first whip out my phone.

Sadly, the Humane AI Pin was simply too slow and feverish to deliver on that premise. I frequently ran into times when, after taking a bunch of photos and holding my palm up to see how each snap turned out, the device would get uncomfortably warm. At least twice in my testing, the Pin just shouted “Your AI Pin is too warm and needs to cool down” before shutting down.

A sample image from the Humane AI Pin's 13-megapixel camera, showing a tree-lined path in a park. A sample image from the Humane AI Pin's 13-megapixel camera, showing a tree-lined path in a park.

A sample image from the Humane AI Pin. (Cherlynn Low for Engadget)

Even when it’s running normally, using the AI Pin’s camera is slow. I’d double tap it and then have to stand still for at least three seconds before it would take the shot. I appreciate that there’s audio and visual feedback through the flashing green lights and the sound of a shutter clicking when the camera is going, so both you and people around know you’re recording. But it’s also a reminder of how long I need to wait — the “shutter” sound will need to go off thrice before the image is saved.

I took photos and videos in various situations under different lighting conditions, from a birthday dinner in a dimly lit restaurant to a beautiful park on a cloudy day. I recorded some workout footage in my building’s gym with large windows, and in general anything taken with adequate light looked good enough to post. The videos might make viewers a little motion sick, since the camera was clipped to my sports bra and moved around with me, but that’s tolerable.

In dark environments, though, forget about it. Even my Nokia E7 from 2012 delivered clearer pictures, most likely because I could hold it steady while framing a shot. The photos of my friends at dinner were so grainy, one person even seemed translucent. To my knowledge, that buddy is not a ghost, either.

A sample image from the Humane AI Pin's 13-megapixel camera, showing a group of people sitting around a table in a dimly lit restaurant. One person is staring at the camera with his chin resting on the back of his hand. The photos is fuzzy and grainy.A sample image from the Humane AI Pin's 13-megapixel camera, showing a group of people sitting around a table in a dimly lit restaurant. One person is staring at the camera with his chin resting on the back of his hand. The photos is fuzzy and grainy.

A sample image from the Humane AI Pin. (Cherlynn Low for Engadget)

To its credit, Humane’s camera has a generous 120-degree field of view, meaning you’ll capture just about anything in front of you. When you’re not sure if you’ve gotten your subject in the picture, you can hold up your palm after taking the shot, and the projector will beam a monochromatic preview so you can verify. It’s not really for you to admire your skilled composition or level of detail, and more just to see that you did indeed manage to get the receipt in view before moving on.

Cosmos OS on the Humane AI Pin

When it comes time to retrieve those pictures off the AI Pin, you’ll just need to navigate to humane.center in any browser and sign in. There, you’ll find your photos and videos under “Captures,” your notes, recently played music and calls, as well as every interaction you’ve had with the assistant. That last one made recalling every weird exchange with the AI Pin for this review very easy.

You’ll have to make sure the AI Pin is connected to Wi-Fi and power, and be at least 50 percent charged before full-resolution photos and videos will upload to the dashboard. But before that, you can still scroll through previews in a gallery, even though you can’t download or share them.

The web portal is fairly rudimentary, with large square tiles serving as cards for sections like “Captures,” “Notes” and “My Data.” Going through them just shows you things you’ve saved or asked the Pin to remember, like a friend’s favorite color or their birthday. Importantly, there isn’t an area for you to view your text messages, so if you wanted to type out a reply from your laptop instead of dictating to the Pin, sorry, you can’t. The only way to view messages is by putting on the Pin, pulling up the screen and navigating the onboard menus to find them.

Humane AI Pin interfaceHumane AI Pin interface
Hayato Huseman for Engadget

That brings me to what you see on the AI Pin’s visual interface. If you’ve raised your palm right after asking it something, you’ll see your answer in text form. But if you had brought up your hand after unlocking or tapping the device, you’ll see its barebones home screen. This contains three main elements — a clock widget in the middle, the word “Nearby” in a bubble at the top and notifications at the bottom. Tilting your palm scrolls through these, and you can pinch your index finger and thumb together to select things.

Push your hand further back and you’ll bring up a menu with five circles that will lead you to messages, phone, settings, camera and media player. You’ll need to tilt your palm to scroll through these, but because they’re laid out in a ring, it’s not as straightforward as simply aiming up or down. Trying to get the right target here was one of the greatest challenges I encountered while testing the AI Pin. I was rarely able to land on the right option on my first attempt. That, along with the fact that you have to put on the Pin (and unlock it), made it so difficult to see messages that I eventually just gave up looking at texts I received.

The Humane AI Pin overheating, in use and battery life

One reason I sometimes took off the AI Pin is that it would frequently get too warm and need to “cool down.” Once I removed it, I would not feel the urge to put it back on. I did wear it a lot in the first few days I had it, typically from 7:45AM when I headed out to the gym till evening, depending on what I was up to. Usually at about 3PM, after taking a lot of pictures and video, I would be told my AI Pin’s battery was running low, and I’d need to swap out the battery booster. This didn’t seem to work sometimes, with the Pin dying before it could get enough power through the accessory. At first it appeared the device simply wouldn’t detect the booster, but I later learned it’s just slow and can take up to five minutes to recognize a newly attached booster.

When I wore the AI Pin to my friend (and fellow reviewer) Michael Fisher’s birthday party just hours after unboxing it, I had it clipped to my tank top just hovering above my heart. Because it was so close to the edge of my shirt, I would accidentally brush past it a few times when reaching for a drink or resting my chin on my palm a la The Thinker. Normally, I wouldn’t have noticed the Pin, but as it was running so hot, I felt burned every time my skin came into contact with its chrome edges. The touchpad also grew warm with use, and the battery booster resting against my chest also got noticeably toasty (though it never actually left a mark).

Humane AI PinHumane AI Pin
Hayato Huseman for Engadget

Part of the reason the AI Pin ran so hot is likely that there’s not a lot of room for the heat generated by its octa-core Snapdragon processor to dissipate. I had also been using it near constantly to show my companions the pictures I had taken, and Humane has said its laser projector is “designed for brief interactions (up to six to nine minutes), not prolonged usage” and that it had “intentionally set conservative thermal limits for this first release that may cause it to need to cool down.” The company added that it not only plans to “improve uninterrupted run time in our next software release,” but also that it’s “working to improve overall thermal performance in the next software release.”

There are other things I need Humane to address via software updates ASAP. The fact that its AI sometimes decides not to do what I ask, like telling me “Your AI Pin is already running smoothly, no need to restart” when I asked it to restart is not only surprising but limiting. There are no hardware buttons to turn the pin on or off, and the only other way to trigger a restart is to pull up the dreaded screen, painstakingly go to the menu, hopefully land on settings and find the Power option. By which point if the Pin hasn’t shut down my arm will have.

A lot of my interactions with the AI Pin also felt like problems I encountered with earlier versions of Siri, Alexa and the Google Assistant. The overly wordy answers, for example, or the pronounced two or three-second delay before a response, are all reminiscent of the early 2010s. When I asked the AI Pin to “remember that I parked my car right here,” it just saved a note saying “Your car is parked right here,” with no GPS information or no way to navigate back. So I guess I parked my car on a sticky note.

To be clear, that’s not something that Humane ever said the AI Pin can do, but it feels like such an easy thing to offer, especially since the device does have onboard GPS. Google’s made entire lines of bags and Levi’s jackets that serve the very purpose of dropping pins to revisit places later. If your product is meant to be smart and revolutionary, it should at least be able to do what its competitors already can, not to mention offer features they don’t.

A screenshot of the Humane AI Pin's web portal, showing previous requests, with the header A screenshot of the Humane AI Pin's web portal, showing previous requests, with the header

Screenshot

One singular thing that the AI Pin actually manages to do competently is act as an interpreter. After you ask it to “translate to [x language],” you’ll have to hold down two fingers while you talk, let go and it will read out what you said in the relevant tongue. I tried talking to myself in English and Mandarin, and was frankly impressed with not only the accuracy of the translation and general vocal expressiveness, but also at how fast responses came through. You don’t even need to specify the language the speaker is using. As long as you’ve set the target language, the person talking in Mandarin will be translated to English and the words said in English will be read out in Mandarin.

It’s worth considering the fact that using the AI Pin is a nightmare for anyone who gets self-conscious. I’m pretty thick-skinned, but even I tried to hide the fact that I had a strange gadget with a camera pinned to my person. Luckily, I didn’t get any obvious stares or confrontations, but I heard from my fellow reviewers that they did. And as much as I like the idea of a second brain I can wear and offload little notes and reminders to, nothing that the AI Pin does well is actually executed better than a smartphone.

Wrap-up

Not only is the Humane AI Pin slow, finicky and barely even smart, using it made me look pretty dumb. In a few days of testing, I went from being excited to show it off to my friends to not having any reason to wear it.

Humane’s vision was ambitious, and the laser projector initially felt like a marvel. At first glance, it looked and felt like a refined product. But it just seems like at every turn, the company had to come up with solutions to problems it created. No screen or keyboard to enter your Wi-Fi password? No worries, use your phone or laptop to generate a QR code. Want to play music? Here you go, a 90-day subscription to Tidal, but you can only play music on that service.

The company promises to make software updates that could improve some issues, and the few tweaks my unit received during this review did make some things (like music playback) work better. The problem is that as it stands, the AI Pin doesn’t do enough to justify its $700 and $24-a-month price, and I simply cannot recommend anyone spend this much money for the one or two things it does adequately.

Maybe in time, the AI Pin will be worth revisiting, but it’s hard to imagine why anyone would need a screenless AI wearable when so many devices exist today that you can use to talk to an assistant. From speakers and phones to smartwatches and cars, the world is full of useful AI access points that allow you to ditch a screen. Humane says it’s committed to a “future where AI seamlessly integrates into every aspect of our lives and enhances our daily experiences.”

After testing the company’s AI Pin, that future feels pretty far away.

[ad_2]

Source Article Link

Categories
Entertainment

A cheaper, more potent tool for creators

[ad_1]

When DJI’s Avata came out in 2022, its agility and people-safe propeller guards made it an instant hit — especially with video pros and content creators. It was hampered by poor video quality, though, and gave users no ability to see the outside world when using the Goggles 2 pilot headset. It was also less maneuverable than other FPV drones and quite expensive.

Now, the company has released its successor, the Avata 2. The camera now uses the same 1/1.3-inch sensor as the Mini 4 Pro, so video quality is highly improved. The Goggles 3 have passthrough cameras to show the world around you and the Avata 2 can now maneuver more like a real FPV drone. Battery life has improved and it’s cheaper to boot.

DJI

The Avata 2 improves just about everything from the very popular original while shaving some dollars off the cost

Pros

  • Improved video quality
  • Better maneuverability
  • Cheaper
  • Longer battery life
Cons

  • Goggles 3 may lack comfort for some

$1,000 at DJI

It sounds great, but how is it in the real world? With my drone and FPV pilot friends, we tested it in a variety of scenarios and events. In general, it’s much improved from its predecessor, but there are a few things to know if you’re considering buying one, especially around the Goggles 3.

Body

The Avata 2 has been completely redesigned to improve flight characteristics. It’s more oblong, less top-heavy, comes with a bigger battery and weighs 30 grams less at just 377 grams. It also just looks less toy-like and more professional.

The updated propeller guards and extensive obstacle detection make it far more crash-resistant than other drones. Updated binocular fisheye sensors cover both the bottom and rear views to detect hazards while increasing flight stability. It also features a “turtle mode” that flips the drone back to a normal stance for takeoff if it hits something and flips over during flight.

The propellers have the same 3-inch size as before, but engine noise is reduced to 81dB, making it more suitable for events like weddings.

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

The camera unit and gimbal are larger and the protective covering is easier to install and remove. The USB-C and card slots, notoriously hard to access on the Avata, are much easier to get to here. Another welcome update is the generous 46GB of onboard storage, more than double the last model and considerably higher than most other drones.

The 18-minute battery life was a big issue with the Avata, but the new model now boasts 23 minutes max flight time, up 28 percent. The batteries can be charged quickly using the charging hub, too, from 0 to 100 percent in 45 minutes with a 60W charger — a bit faster than before, considering the higher capacity. The hub also supports DJI’s new power accumulation feature, letting you completely drain the two weakest batteries to transfer power to the strongest.

Transmission and controls

Like the Mini 4 Pro and Air 3, the Avata uses DJI’s latest O4 transmission system that boosts range to 13km in the US and 10km in Europe — impressive for an FPV drone. It streams a 1080p video feed at up to 100 fps, with latency as low as 24 milliseconds using the Googles 3.

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

Speaking of, the Goggles 3 have a built-in battery like the Goggles Integra while updating to O4 capability. Along with the improved transmission, they now come with higher-resolution 1080p MicroOLED displays and improved eye comfort compared to the Goggles 2 that shipped with the original Avata.

The big update, though, is the Real View pass-through cameras. With a double tap on the side of the headset or side button on the RC Motion 3 controller, you’ll instantly switch to a forward view outside the Goggles 3. The resolution isn’t very high, but at least you can see outside without removing them. A setting allows you to see the drone view as a picture-in-picture to boost situational awareness.

The Goggles 3 now allows you to capture up to 1080p video directly to a microSD card on the headset itself and you can even stream live to another Goggles 3 headset simultaneously. Video quality is still higher when capturing directly to the drone, of course, but it does provide a backup. You can also record a view showing the on-screen controls — handy for reviewing flights.

Another new feature is head tracking to control the aircraft and gimbal with head functions, allowing better control for experienced pilots.

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

There are a few downsides. It still doesn’t support glasses, so folks with astigmatism will need to purchase custom lenses. If you have the Goggles V2, which does support eyeglasses, it’s unfortunately not compatible with the Avata 2.

DJI hasn’t quite nailed the comfort part, either. The padding isn’t soft enough, so the edges pushed against the bridge of my nose, creating some discomfort. It was better after installing the additional (included) pad, but still not perfect.

The RC Motion 3 controller has been considerably revamped for the better. It’s smaller, lighter and has a more comfortable grip. Controls are also more precise, with a new sidelink wireless solution boosting the quality of the joystick’s signal. And for FPV enthusiasts who prefer a classic drone controller, the Avata 2 also works with the new FPV Remote Control 3.

Performance

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

Where the original Avata dumbed down FPV performance, the Avata 2 goes all in. It’s incredibly maneuverable, and unlike most FPV drones, highly crash-resistant.

Maximum speeds are the same as the Avata at around 60MPH in manual mode with obstacle detection turned off. That might be slower than purpose-built open-propeller FPVs, but it’s fast for a consumer product and won’t slice up bystanders like regular drones.

Though it’s not faster, it’s quicker and more precise than the Avatar thanks to the slimmed-down and better-balanced body. It turns on a dime around obstacles and climbs and descends with alacrity. At the same time, you can plow through small twigs or leaves and barely slow down.

Flying it is truly fun. The improved Goggles 3 with O4 give a clearer view, and the Motion 3 controller allows for precise and intuitive control. For events around people, you can fly in normal or beginner modes for safety, or elsewhere at 35 or 60 MPH in sport and manual modes.

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

The Motion 3 adds a new trigger setting that rotates the Avata 2 in place for easier maneuvers and it now includes a dedicated mode button for normal or sport flying. The joystick is larger and the controller more responsive and precise overall.

Head tracking is a common feature on FPV and Cinewoop drones, and it now works on the Avata 2. I found it helpful mainly for controlling the camera tilt, as it’s a natural way to adjust that parameter.

If you want to fly the Avata 2 at top speed in manual mode, you’ll need the FPV Remote Controller 3, which is sold separately for $199.

The Easy Acro mode is cool, but a bit cumbersome since you have to switch it on and off. Also, it’s so easy to implement with the RC Motion controller that it’s almost… boring. Tricks include slides, 180-degree drifts and flips, though you can’t record video in flip mode.

DJI Avata 2 reviewDJI Avata 2 review

Steve Dent for Engadget

The Avata 2 is better than before in stiff winds, but can still get buffeted around and often has to lean against the breeze, causing choppy or unlevel footage. Keeping things smooth, particularly outdoors, requires more practice than with a drone like the Mini 4 Pro.

It doesn’t have forward-facing sensors, so its main protection is the prop guards and high durability. It does detect obstacles from the rear and below, and that kept me safe in some tight spots. I still crashed it at least four to five times though, luckily just in the grass or against small twigs and leaves — without leaving a scratch. This could make some pilots overconfident, though.

Battery life is noticeably better than the Avata and eliminates much of the range anxiety typical with FPV drones. However, you only get 18-20 minutes of realistic range. Most serious pilots will want to have at least three batteries with the Fly-More kit, and preferably more.

Video

The Avata 2 eliminates the Avata’s mediocre video quality via a much larger 1/1.3-inch sensor with 10-bit D-LogM capability borrowed from the Mini 4 Pro.

As before it offers normal, wide and ultra-wide shooting with up to a 155-degree field of view. It has two stabilization modes, RockSteady 3.0 and HorizonSteady. The latter is best if you want to keep things level, particularly in high winds — it does tend to lean into wind. RockSteady smooths footage more while allowing the camera to tilt, all the better to show off thrilling maneuvers.

DJI Avata 2 fpv drone reviewDJI Avata 2 fpv drone review

It supports 4K video at up to 60 fps or 1080p and 2.7K at 120 fps. However, it can only capture 12-megapixel JPEG stills, so it’s not ideal for photography.

All that puts it leaps ahead of the Avata for video. Images are generally sharper and colors more accurate. The 10-bit D-LogM mode allows for higher dynamic range in bright or contrasty conditions. The one quality flaw I noticed was occasionally blockiness in video at 4K 60p when flying fast, likely artifacts due to the 130Mbps bit rate (beware of re-encoding for YouTube).

It’s much improved in low light for cityscapes or interiors as well thanks to the larger sensor. It’s not up to the level of a mirrorless camera, but as with the Mini 4 Pro, it’s fine for well lit night scenes in most cases. ISO levels are usable up to 12800 with noise reduction, with the 25600 max setting being for emergency use only.

Wrap-up

DJI Avata 3 drone review: Improved video makes it a potent tool for creatorsDJI Avata 3 drone review: Improved video makes it a potent tool for creators

Steve Dent for Engadget

The Avata 2 is bound to be another hit for DJI. It eliminates nearly every flaw on the Avata, boosting picture quality, FPV maneuverability, battery life, range and more. Video quality, in particular, will make it even more desirable for content creators, event videographers and others (my pro friends, who already own the Avata, are planning to order one). At the same time, it’s a fantastic FPV drone for beginners — just super fun to use.

It’s also more affordable. The Avata 2 is priced at $1,000 with a single battery in the Fly-More kit with the Goggles 3 and Motion 3 controller, or $1,200 with three batteries, the two-way charging hub and a carrying case. You can also purchase it alone at $490.

That compares to original $630 price for the Avata. That model also cost $1,388 for the Avata with Goggles and Motion Controller, plus another $279 for the 2-battery/charger Fly-More kit (for $1,667 total) — so the Avata 2 is nearly $500 cheaper in that configuration. As mentioned, the FPV Remote Controller 3 is $199, while the ND Filters Set is $79.

The Avata 2 doesn’t have much competition, as regular FPV drones generally lack propeller guards and rivals like Autel don’t offer similar products. That doesn’t really matter, though, as DJI’s latest drone is both powerful and attractively priced — making it a highly desirable product for creators of all stripes.

[ad_2]

Source Article Link

Categories
Entertainment

DuckDuckGo unveils a $10 Privacy Pro plan with a no-log VPN

[ad_1]

Many web browser companies offer VPNs these days, including Google, Mozilla and Opera. DuckDuckGo is the latest to join the fray, with a Privacy Pro plan that includes three services. Along with a VPN, you’ll get personal information removal and identity theft restoration services for $10 per month or $100 per year. The subscription is only available in the US for now. The Privacy Pro features are built directly into the DuckDuckGo browser, so you won’t need to install separate apps.

DuckDuckGo says it won’t keep VPN logs in order to help maintain user privacy. As such, it says it has “no way to tie what you do while connected to the DuckDuckGo VPN to you as an individual — or to anything else you do on DuckDuckGo, like searching.” DuckDuckGo is using the open-source WireGuard protocol to encrypt your traffic and route it through VPN servers. As it stands, the company has VPN servers across the US, Europe and Canada. It plans to add more over time.

Screenshot of DuckDuckGo's VPN feature.Screenshot of DuckDuckGo's VPN feature.

DuckDuckGo

One subscription will cover up to five desktop and mobile devices. Rather than using an account, you’ll have a random ID that you’ll need to keep safe. If you wish, you can add an email address for easier authorization across devices. Still, you won’t need to hand over any personally identifiable information to DuckDuckGo — the company is using Stripe, Google Play and the Apple App Store to handle payments.

DuckDuckGo’s focus on protecting user privacy extends to the personal information removal tool, which removes details such as your full name, home address and birthday from people search sites and data broker services. The details you provide during the setup process stay on your device and requests to remove your personal information start directly from your desktop (for now, you need a Windows or Mac computer to set up and manage the personal information removal tool).

DuckDuckGo says this is a first for a service of its ilk, as your details aren’t stored on remote servers. To help it build the tool, DuckDuckGo bought data removal service Removaly in 2022. The personal information removal service will regularly re-scan people search sites and data brokers to see if your info pops up again so you can dela with it accordingly.

As for the identity theft restoration service, DuckDuckGo will connect you with an advisor from Iris, its partner, if your identity is stolen. The advisor will help with restoring any stolen accounts and financial losses, as well as fixing your credit report. Moreover, they can help you cancel and replace important documents such as your driver’s license, bank cards and passport. Iris can also provide you with a cash advance if you’re far from home and stuck due to identity theft.

Again, you won’t have to provide any of your personal information up front. You’ll only need to provide an advisor with those details if you need help after having your identity stolen.

Expanding privacy protections through these services is a logical way for DuckDuckGo to try and boost its bottom line. Privacy Pro seems reasonably priced compared to some of the alternatives too — Mozilla’s personal information removal service alone costs $9 per month.

[ad_2]

Source Article Link

Categories
Entertainment

Amazon stops paying bonuses to Alexa developers

[ad_1]

Amazon has cut paid perks for Alexa developers. With a bigger focus on generative AI, the voice assistant’s third-party apps (skills) aren’t a priority. An Amazon spokesperson told Engadget that the “older programs have simply run their course, so we decided to sunset them.”

Launched in 2017, when Alexa was all the rage, the program paid developers bonuses for skills that resonated with users. It was part of Amazon’s quest to turn Alexa Skills into a booming app store. (Did that happen?)

At the company’s fall 2023 devices event, Amazon previewed its next-gen version of Alexa, with ChatGPT-like generative AI abilities. With AI powers, Alexa appeared versatile enough to address all sorts of queries and requests without creating apps and skills manually. Alexa isn’t going anywhere; Amazon is just making it think for itself.

— Mat Smith

The biggest stories you might have missed

​​You can get these reports delivered daily direct to your inbox. Subscribe right here!

Magic Eraser, Photo UnBlur, Magic Editor and more will be widely available in May.

Free Google Photos users get enhanced editing features without paying $20+ annually. This means all users will get a few of Google’s AI-powered tools, such as Photo UnBlur, Magic Eraser, and Magic Editor. I can attest: Photo UnBlur is a game-changer when taking shots of toddlers that will. Not. Stay. Still.

Continue reading.

It works on T-Mobile and AT&T’s networks.

TMATMA

Engadget

Amazon has the Nothing Phone 2 on sale for the first time since its launch. The offbeat mainstream smartphone alternative is $74 off its usual price, down to $625. The deal includes the version with 12GB of RAM and 256GB of storage, and it’s ready for activation on T-Mobile or AT&T.

Continue reading.

The game is also getting Contra DLC in May.

Hit retro bullet-hell-rogue-ish Vampire Survivors is coming to PlayStation — possibly the only platform it hasn’t been on yet. The game is also getting a batch of crossover DLC on May 9. Vampire Survivors: Operation Guns brings Contra characters and weapons, so expect a lot more guns. 22 of them, in fact.

Continue reading.

[ad_2]

Source Article Link