El Maxfree K3 es un teclado mecánico compacto de 82 teclas (83 teclas para la versión del Reino Unido) con un toque interesante: tiene una pantalla táctil incorporada de 13 pulgadas.
La pantalla IPS ofrece una resolución de 1920 x 720 píxeles, una frecuencia de actualización de 60 Hz, hasta 300 nits de brillo y una gama de colores NTSC del 60%, además tiene capacidad táctil de 10 puntos.
El dispositivo mide 1,08 x 0,97 x 0,13 pulgadas y pesa 4,67 libras. Aunque puede que no sea el producto más atractivo, tiene beneficios prácticos y la pantalla táctil permite interacciones rápidas. La pantalla se puede ajustar para que esté en el ángulo correcto con respecto al teclado o plana para una posición de visualización más cómoda.
Selección de puertos
El teclado mecánico K3 cuenta con retroiluminación RGB y admite 20 efectos de iluminación diferentes. Utiliza teclas PBT, conocidas por su durabilidad y resistencia a la corrosión, con interruptores Gateron Yellow intercambiables en caliente que proporcionan una fuerza de actuación suave de 50 g.
El dispositivo incluye dos puertos USB 3.0, un puerto tipo C, una interfaz PD y un lector de tarjetas SD. También cuenta con una ranura M.2 incorporada compatible con SSD 2280, 2260 y 2242 para espacio de almacenamiento adicional. Un par de parlantes estéreo están integrados en el diseño y el volumen se puede controlar usando la perilla multimedia ubicada en el lado superior derecho del teclado.
Maxfree K3 es compatible con dispositivos Windows, macOS y Android y viene con varios accesorios: cable tipo C a tipo C, cable tipo A a tipo C, cable tipo C a tipo A/cable divisor HDMI. También se incluye una bolsa de almacenamiento, una pieza de desmontaje, un extractor de teclas, un adaptador de corriente y tres clips de silicona para gestión de cables.
Suscríbase al boletín TechRadar Pro para recibir las principales noticias, opiniones, características y orientación que su empresa necesita para tener éxito.
Los propietarios de Raspberry Pi de todo tipo ahora pueden comprar la marca Tarjetas SD Está optimizado para el ecosistema Pi directamente de distribuidores autorizados, y se prometen mejoras de rendimiento adicionales específicamente para el Pi 5.
Fundación Frambuesa Pi Anunciar La compañía se ha asociado con el proveedor de tarjetas OEM Longsys para garantizar que las nuevas tarjetas “ofrezcan un rendimiento excepcional de lectura y escritura aleatoria” en todas y cada una de las computadoras Pi, con soporte de cola de comandos (CQ) en Frambuesa Pi 5 Los empujará aún más.
Abrir este complemento en el controlador de host Pi 5 requiere una actualización al último sistema operativo Raspberry Pi; Lo que por supuesto significa que los usuarios están ejecutando otros archivos. Distribuciones de Linux No tuvieron suerte en el futuro previsible.
Cola de comandos
Las tarjetas compatibles con CQ, con el hardware adecuado, pueden recibir comandos de lectura/escritura en cualquier orden desde la cola de lectura/escritura.
La versión Pi 5 no incluía inicialmente soporte en su controlador de host para CQ, que reemplaza la interfaz de controlador de host SD (SDHCI) heredada cuando se detecta una tarjeta compatible, ya que anteriormente solo estaba disponible en dispositivos eMMC hasta que el desarrollador de Pi lo decidió en 2024. para trabajar Agregue soporte para Pi OS directamente.
Si bien son buenas noticias, la Fundación Pi admite que esta no es la revolución de velocidad que cabría esperar: “La cola de comandos permite que el controlador flash oculte más latencia asociada con el acceso a páginas flash NAND dispares”, y señala que las tarjetas. es capaz de lograr una “mejor productividad” en teoría.
Tarjetas SD
Sin embargo, es un producto nuevo a la venta, y la Fundación Pi señala que se ha ordenado a los minoristas que solo promocionen sus propias tarjetas y las incluyan en los paquetes. En los revendedores, que parecen tener libertad para fijar el precio de los productos con cierto grado de flexibilidad, las nuevas tarjetas SD tienen un precio de alrededor de $10/£10 por 32GB y $20/£20 por 64GB.
Suscríbase al boletín TechRadar Pro para recibir las principales noticias, opiniones, características y orientación que su empresa necesita para tener éxito.
Otras tarjetas pueden ser más baratas, pero las que realmente cumplen con la especificación A2 y permiten la cola de comandos en las verdaderas tarjetas A2 en las computadoras Pi 5, pueden ser una compra que vale la pena para aquellos nuevos en la minicomputadora Pi o para los entusiastas que buscan comenzar a utilizarla. velocidad.
Mientras tanto, una nueva funda de silicona duradera, Raspberry Pi Bumper, ya está disponible para el Pi 5. Protege tanto el Pi “como la superficie en la que lo colocas” y cuesta sólo $3. El estuche también se adapta al conjunto de ventilador y disipador de calor Active Cooler para el Pi.
El ESP32-S3 es un potente microcontrolador desarrollado por Espressif Systems, diseñado principalmente para aplicaciones integradas que requieren conectividad Wi-Fi y Bluetooth.
Como se vio programa CNXWaveshare presentó el ESP32-S3-LCD-1.47 (para darle su nombre completo y pegadizo), un dongle USB compacto basado en el microcontrolador Espressif. El dispositivo integra conectividad inalámbrica con flash de alta capacidad y PSRAM, lo que lo convierte en una solución adecuada para una amplia gama de aplicaciones integradas, incluidos dispositivos IoT, productos para el hogar inteligente y dispositivos portátiles.
En el corazón del dispositivo se encuentra el ESP32-S3R8 de Espressif, un procesador Tensilica LX7 de doble núcleo que funciona a hasta 240 MHz. También incluye 512 KB de RAM, 8 MB de PSRAM y 16 MB de memoria flash, además de una pantalla TFT LCD de 1,47 pulgadas, que ofrece una resolución de 320 x 172 píxeles. La pantalla funciona con el controlador ST7789, lo que la hace adecuada para ejecutar pequeñas aplicaciones GUI, como las creadas con la biblioteca LVGL de código abierto.
Gestión energética avanzada
Las opciones de conectividad del ESP32-S3-LCD-1.47 incluyen Wi-Fi 4 a 2,4 GHz y Bluetooth 5.0, que admite redes de malla y comunicaciones de largo alcance. También ofrece capacidades de expansión con dos conectores de 9 pines, lo que permite conexiones GPIO, UART y pines de alimentación para mayor versatilidad en proyectos de desarrollo. El dispositivo también incluye una ranura para tarjetas microSD, que proporciona almacenamiento externo para archivos y fotografías.
Una de las características notables del ESP32-S3-LCD-1.47 es la administración de energía. El microcontrolador admite múltiples modos de bajo consumo, como el sueño ligero y profundo, lo que permite a los desarrolladores crear aplicaciones energéticamente eficientes. Se puede programar utilizando el marco ESP-IDF o Arduino IDE, por lo que es accesible tanto para profesionales como para aficionados.
Aunque existen placas ESP32-S3 similares a la LILYGO T-HMI, el factor de forma compacto de dongle USB de la ESP32-S3-LCD-1.47 la convierte en una opción interesante para quienes buscan una placa de desarrollo con pantalla incorporada.
ESP32-S3-LCD-1.47 está disponible para su compra desde aquí Tienda oficial de Waveshare Por $12.99 más envío. Puede encontrar información adicional y una guía de configuración en Página wiki de Waveshare.
Suscríbase al boletín TechRadar Pro para recibir las principales noticias, opiniones, características y orientación que su empresa necesita para tener éxito.
No importa cuánto lo intentemos, siempre sentimos que nos estamos quedando sin almacenamiento rápidamente. Afortunadamente, vivimos en un mundo donde existen las tarjetas microSD y, mejor aún, nuestras tarjetas favoritas están en oferta. Actualmente, Tarjeta de memoria microSD Samsung Pro Plus con una capacidad de 512 GB Con un adaptador, el precio bajó de $84 a $30, un descuento del 64 por ciento. El precio bajo estándar está disponible para el modelo con una velocidad de lectura de 180 MB/s.
El teléfono Pro Plus de Samsung es La mejor opción para una tarjeta microSDque es la mejor opción para la mayoría de las personas. Junto con esta velocidad de lectura, la tarjeta microSD tenía un rendimiento de escritura secuencial de 130 MB/s, que quedó en segundo lugar en términos de velocidades de lectura y escritura aleatorias de todas las tarjetas de memoria. Tarjetas de memoria micro SD Lo hemos probado. A esas velocidades, debería funcionar muy bien ya sea que lo use con una cámara o con una computadora portátil para juegos, pero ocupa el primer lugar gracias a su asequibilidad general.
Samsung
este MicroSD También puede almacenar vídeo 4K UHD y tiene las últimas velocidades U3 y V30. Además, con la adición de un lector USB, no debería tener problemas para alcanzar sus velocidades máximas. Si no necesita los 512 GB completos, consulte Tarjeta de memoria microSD Samsung Pro Plus con una capacidad de 256 GBEl precio actualmente está rebajado en un 58 por ciento, de $48 a $20.
Samsung el tiene Anunciar Una nueva tarjeta microSD hace algo sin precedentes para la empresa: tiene 1 TB de almacenamiento.
Si bien sus rivales han ofrecido durante mucho tiempo tarjetas microSD de 1 TB, Samsung no lo ha hecho, y ahora Pro Plus y Evo Select buscan enfrentarse a la competencia. Las mejores tarjetas microSD.
La compañía dice que las tarjetas utilizan la tecnología Samsung V-NAND (V8) de octava generación, y esto ayuda a mejorar el rendimiento y la capacidad de las tarjetas. Dado que estas tarjetas están dirigidas a profesionales, como fotógrafos y otros creativos, estas características son importantes.
SSD Samsung de 1TB
Samsung había introducido anteriormente productos de 1 TB, pero eran SSD y SSD portátiles. La empresa estima que 1 terabyte de capacidad es suficiente para 400.000 dispositivos. 4k Imágenes UHD o más de 45 juegos de consola, los cuales probablemente satisfarán tus necesidades.
Técnicamente, Pro Plus y Evo Select parecen encajar bien. Las velocidades de transferencia de datos en el primer modelo alcanzan los 180 MB/s y cuenta con una clasificación de velocidad UHS Grado 3 para capturar videos 4K UHD de alta calidad. La clasificación de vídeo V30 también significa que las transferencias de archivos son extremadamente rápidas.
El Evo Select puede transferir archivos a una velocidad de hasta 160 MB/s y parece estar más destinado al uso diario que al trabajo puramente profesional.
Samsung dice que también hay un nuevo controlador en ambas tarjetas microSD, que están construidas con tecnología de proceso de 28 nm, en comparación con los 55 nm de la línea anterior de Samsung.
Suscríbase al boletín TechRadar Pro para recibir todas las noticias, opiniones, funciones y orientación que su empresa necesita para tener éxito.
La durabilidad es una preocupación para cualquiera que lleve una unidad flash (ya que los daños podrían fácilmente ser catastróficos para el proyecto) y Samsung ha probado las tarjetas en longitudes bastante extremas, incluyendo agua, altas temperaturas, rayos X y (aterradores) campos magnéticos.
(Crédito de la imagen: Samsung)
Comienza tu juego
Además de para los fotógrafos profesionales, uno de los mejores usos de una tarjeta microSD es para consolas de juegos, como interruptor de nintendoMencionamos antes que una tarjeta microSD de 1 TB puede almacenar hasta 45 juegos (si cada uno tiene un tamaño de alrededor de 20 GB), lo que significa que puedes almacenar muchos … Los mejores juegos de Switch.
Pro Plus y Evo Select también son compatibles con teléfonos inteligentes Android, otras consolas de juegos, tabletas, computadoras portátiles y muchos más dispositivos.
Ambos modelos vienen en opciones de 128 GB, 256 GB y 512 GB junto con 1 TB, y el Evo Select viene con una opción de 64 GB en la parte inferior. Los precios oscilan entre $ 24,99 y $ 153,99 para la versión Pro Plus y entre $ 12,99 y $ 131,99 para la versión Evo Select.
Los precios más altos del modelo de 1TB colocan a Evo Select y Pro Plus por encima de competidores como Energía de silicio A1que se vende por unos 62 dólares por una tarjeta de 1 TB, y Tarjeta microSD Lexar PlayLo cual cuesta alrededor de $73 USD por el mismo producto.
Sin embargo, Samsung sigue siendo una marca muy confiable y hay algunas innovaciones técnicas por las que puede valer la pena pagar. Además, obtienes una garantía de cinco años.
Una empresa china saltó a la fama a principios de 2024 con el primer 2TB del mundo Tarjeta micro SD – que ya hemos probado – Ahora planea lanzar un SSD PCIe NVMe de 16 TB, también el primero del mundo, en Computex 2024.
Los detalles exactos son escasos, y el comunicado de prensa de AGI solo menciona “PCIe de 16 TB SSD HMB líder en la industria, que ofrece un rendimiento incomparable” junto con una imagen SSD M.2 2280.
No sabemos si será un modelo PCIe de 4ª o 5ª generación y si tendrá disipador de grafeno pero es seguro que lo utilizará. QLC Piezas.
Tiene una prima importante: en el momento de escribir este artículo, es el modelo más barato. Misil Sabrent S NVMe es una pieza PCIe 3.0 y se vende por $800. Un SSD de 16 TB basado en el mismo precio por terabyte costaría la friolera de $1,600, si no más, considerando que es un modelo premium.
Este es un poco más caro que el centrado en la empresa. Solidigm D5-P5316que comienza en $1,490 pero este último es un SSD de 2.5 pulgadas (por lo que es mucho más grande y no cabe en una computadora portátil) y tiene una capacidad menor.
Un SSD SATA de 8 TB puede ser una ganga
La abreviatura HMB se refiere a una tecnología llamada Búfer de memoria del host Es una forma común para que los fabricantes reduzcan costos eliminando componentes DRAM mientras mantienen el rendimiento; Al hacerlo, también se libera espacio para agregar tarjetas de memoria adicionales.
Suscríbase al boletín informativo TechRadar Pro para recibir las principales noticias, opiniones, características y orientación que su empresa necesita para tener éxito.
AGI también planea presentar un SSD SATA de 8 TB que competirá con Samsung 870QVO, la unidad más común de este tamaño que se vende por alrededor de $600. Se espera que el dispositivo sin nombre “supere los límites del almacenamiento a nivel de consumidor, estableciendo un nuevo estándar de capacidad” y probablemente integre la familia AI238 existente, que viene con una garantía de tres años.
La empresa también produce Unidades de estado sólido portátiles, Puerto USB Además de módulos de memoria DDR5 y DDR4. Nos hemos comunicado con AGI para obtener muestras para revisión y detalles adicionales sobre estos productos. Actualizaremos el artículo a tiempo.
apetito por Unidades SSD de gran capacidad El mercado de consumo es muy pequeño, lo que explica por qué la mayoría de los portátiles que se venden por menos de 1.000 dólares están disponibles con hasta 2 TB de capacidad. La llegada del almacenamiento en la nube, junto con la capacidad de ejecutar software como servicio (es decir, desde la nube), significa que 2 TB son suficientes para la mayoría de las personas.
Además, las computadoras portátiles más grandes (de 15,6 pulgadas y superiores) a menudo tienen una ranura SSD de repuesto, lo que significa que puede agregar otra SSD vacía para obtener capacidad adicional, eliminando la necesidad de optar por el modelo más grande y de mayor precio.
AGI ha lanzado la primera tarjeta microSD de 2TB comercialmente viable, superando a empresas como SanDisk, Lexar, Samsung Y ponche Kioxia.
Las grandes empresas de tecnología han estado lanzando tarjetas de esta capacidad durante un tiempo (Kioxia anunció por primera vez planes para lanzar una tarjeta de 2 TB en 2022), pero hasta ahora ninguna ha llegado al mercado.
Si bien hay muchas tarjetas microSD de 2 TB disponibles para comprar en eBay, Amazonas Y Aliexpress, desafortunadamente, todos son falsos, pero la tarjeta microSD AGI Supreme Pro TF138 de 2TB es definitivamente real, y deberíamos saberlo, ya que teníamos una en prueba.
No exactamente 2TB
El Supreme Pro TF138 viene en capacidades de 1TB y 2TB, y si bien es posible, e incluso relativamente fácil, comprar la versión de 1TB en línea a través de empresas como Newegg, la versión de 2TB es mucho más difícil de conseguir.
El Supreme Pro TF138 viene con un adaptador de tarjetas SD y un lector de tarjetas para los puertos USB-C y está preformateado en exFAT. En las pruebas, descubrimos que en realidad proporciona 1.935.140.716.544 bytes, que es un 12 % menos que los 2.199.023.255.552 bytes que tiene que proporcionar 2 TB, pero sigue siendo una capacidad impresionante en un factor de forma tan pequeño.
La tarjeta tiene más que ver con el tamaño que con el rendimiento, con velocidades máximas de lectura/escritura de 170/160 MB/s utilizando el lector de tarjetas CR138 incluido.
¿Se pregunta cuánto tendrá que pagar por la primera tarjeta microSD de 2 TB del mundo? Nosotros también. Desafortunadamente, aunque tenemos el producto en nuestras manos y lo hemos probado completamente, no podemos decirle dónde puede comprarlo o, lo que es más importante, cuánto costará. El precio de la versión de 1 TB en Newegg era de $66,99, descontado del MSRP de $99,99, por lo que podría dar una pequeña pista.
Suscríbase al boletín informativo TechRadar Pro para recibir las principales noticias, opiniones, características y orientación que su empresa necesita para tener éxito.
La tarjeta AGI de 2 TB ya está disponible para su compra, en teoría, por lo que debería poder conseguir una si pasa mucho tiempo buscando, pero tenga en cuenta que puede encontrar algunas falsificaciones en el camino.
Puedes leer nuestra reseña completa del Supreme Pro TF138 de 2TB aquí.
Most microSD cards are fast enough for stashing photos, recording video and transferring files, but some will get you a little more bang for your buck than others. If you’re looking to boost the internal storage of your Nintendo Switch, Steam Deck, GoPro, Raspberry Pi or any other device that still has compatibility with microSD cards, we can help. We’ve thoroughly researched the market and put more than a dozen microSD cards through a range of benchmark tests: Here are the best that we’ve tested, along with some general advice on what to look for when buying a new card.
Editor’s note (4/24/24): Samsung has released an upgraded version of our “best value” pick, the Evo Select. We plan to test it soon and update our guide accordingly. Samsung says the new model can reach sequential read speeds up to 160 MB/s, so it should still be a step down from our other top picks, which we continue to recommend
What to look for in a microSD card
Capacity
The first thing to figure out when buying a microSD card is how much space you need. Modern cards are usually available in sizes ranging from 32GB to 512GB, while a handful offer 1TB models as well. 2TB cards are theoretically possible but still in the prototype stage.
For most, a 128GB or 256GB model should be the sweet spot between price and storage space. But if you need more room — say, for stashing a bunch of games on a Steam Deck — a 512GB card could make more sense and often provides a better cost-per-GB ratio. These days, you can find a decent 128GB card for around $15 or less, a good 256GB card for less than $30 and a solid 512GB card for less than $40 (though many cost closer to $50 or $60). There’s a starker increase when you go up to 1TB cards, which typically cost closer to $100.
Note that a microSD card’s performance may differ depending on what capacity you buy. SanDisk says its 128GB Extreme card delivers sequential write speeds up to 90 MB/s, for example, while the higher-capacity models in the same line offer up to 130 MB/s.
When we talk about microSD cards today, we usually refer to cards that use the microSDXC (eXtended Capacity) standard, which have a capacity between 32GB and 2TB. Your device needs to support this for it to work with a microSDXC card. This will almost never be an issue these days, but some older devices (a Nintendo 3DS, for instance) are only compatible with microSDHC (High Capacity) cards, which range from 2GB to 32GB.
Read and write speeds
MicroSD cards are primarily judged on their read and write speeds, which are usually measured in megabytes per second (MB/s). Generally, most microSD cards have faster read speeds than write speeds.
These metrics can then be broken down into sequential and random performance. Sequential read and write speeds matter when you’re trying to access or save long, constant streams of data, such as opening a large video or copying a big batch of files from a PC. If you want to use a microSD card for media storage, this is particularly important. Random performance, meanwhile, is about how quickly a card can read and write small files scattered throughout the device.
Since random read/write speeds are much lower than sequential ones, storage device makers tend not to advertise them as loudly. But they’re important if you use a card with a gaming device or a single-board computer like the Raspberry Pi, where it often has to rapidly save and access small bits of data in random locations.
SD Association
Speed ratings
If you look at a microSD card, you’ll see a buffet of numbers, letters and symbols. Most of these refer to the card’s speed class and performance ratings, which are determined by the SD Association.
A card’s Video Speed Class, or V-rating, details its minimum sequential write speed, which is especially important when recording video from a camera. It ranges from V6 to V90. Most of the cards we tested had a V30 rating, so they have a sequential write speed of at least 30 MB/s. This should be enough to support up to 4K video at lower bitrates. Higher-rated V60 and V90 cards are usually better for capturing 8K, but they come at a much higher cost.
The UHS Speed Class, or U-rating, also refers to a card’s minimum sequential write speed. It comes in two varieties: U3, which mandates a minimum of 30 MB/s, and U1, which is rated for 10 MB/s.
The older Speed Class rating overlaps with the other two systems. It’s signified by a C symbol and goes from Class 2 to Class 10, with the number (again) indicating minimum sequential write speed. This rating is less relevant nowadays, but you may still see a “C10” logo on some cards.
The Application Performance spec, marked by an A symbol, is an indicator of random read/write speeds. This is measured in IOPS, or input/output operations per second, rather than MB/s. There are two categories here: A1 cards offer a minimum random read speed of 1,500 IOPS and a minimum random write speed of 500 IOPS, while A2 cards bump those up to 4,000 IOPS and 2,000 IOPS, respectively. Both ratings also guarantee sequential write speeds of at least 10 MB/s.
To keep it simple, most people should look for a card with V30, U3 and A2 ratings. It’s totally possible to get a solid card without those: A U1 card might be worth it if you just need a cheap, high-capacity option, for example. V60 and V90 cards are worth a look if you’re serious about shooting high-resolution photos and video as well. But overall, cards with the certifications above should provide the best blend of price and performance today.
It’s important to emphasize that these ratings are baselines. Most V30 cards offer significantly higher write speeds than 30 MB/s, for instance, and some A1 cards can outperform some A2 models in practice. The speeds advertised by manufacturers aren’t always 100 percent accurate, either: Sometimes the card will be slower in real-world use, other times it may actually be a bit faster.
UHS bus speeds
The other spec to note is the card’s bus interface. Most microSD cards available today are UHS-I, which have a theoretical maximum speed of 104 MB/s. There are also UHS-II cards, which have an extra row of pins on the back and can reach up to 312 MB/s. (A UHS-III standard exists as well but hasn’t seen wide adoption.) These are labeled on the card with a Roman numeral I or II.
The fastest microSD cards you can buy right now are UHS-II cards, and they’re usually the ones with V60 or V90 ratings. If you shoot lots of 4K to 8K video or frequently use burst mode to capture ultra high-res photos, the performance gains of a good UHS-II card can save you time.
But these are much more expensive than UHS-I cards: For instance, this 128GB model from Lexar is a decent bargain at $40. That’s less than many UHS-II models we’ve seen in the past but still more than double the typical price of our top pick mentioned below. You need a device that’s compatible with the UHS-II interface to see any benefits, too, and stock for UHS-II cards is generally spottier. For now, the higher speeds aren’t worth the price premium for most people, so we stuck mostly to UHS-I cards here.
We’ll also note Samsung’s recent announcement of a new 256GB microSD card based on an entirely different standard called SD Express. This is theoretically much faster than any UHS-I or UHS-II option: Samsung claims this specific model can reach sequential read speeds up to a whopping 800 MB/s. For context, that’d be quicker than some older SSDs. SD Express has technically been around for several years but hasn’t seen wide adoption, so exactly how this card performs in reality — and how much it’ll cost — remains to be seen. We’ll test the device once it becomes available, which Samsung says will be sometime later in 2024.
Kris Naudus / Engadget
A note on card readers, the Nintendo Switch and Steam Deck
While the UHS-I spec has a theoretical maximum of 104 MB/s, some UHS-I cards can exceed that speed through proprietary extensions. You need a compatible card reader and host device to take advantage of that extra performance, though. If you find a UHS-I card advertising speeds higher than 104 MB/s, this is what’s going on. You can see these limits in action with a Nintendo Switch or Steam Deck: Both of those gaming devices support the UHS-I interface and don’t go beyond its official speed, flattening any sequential gains some cards may have elsewhere. The broader takeaway: Your microSD card will only be as fast as the slowest link in your chain.
Warranty
Many microSD cards are designed to be durable, with protection from water, extreme temperatures, X-rays and drops. Still, in case of catastrophe, a long warranty is always good to have. Many manufacturers offer lifetime limited warranties, though we’ve noticed that “endurance” cards marketed to withstand more hours of writing are usually covered for a much shorter period of time.
Avoiding counterfeits
The memory card market has had a particular problem with scammers selling fake products. To guard against this, only buy from a known brand and a reputable retailer such as Best Buy, B&H Photo or Adorama. If you shop at Amazon, only buy if the shipper and seller is Amazon.com. (Though a handful of users have reported receiving counterfeits even from Amazon directly in the past.) Remember: If a price seems too good to be true, it probably is. Be wary of any retailer offering significantly a lower price than others.
Once you receive a card, check its packaging for any irregularities. You can run benchmark tests like CrystalDiskMark or BlackMagic Disk Speed Test to verify its speeds aren’t drastically lower than what’s advertised (or possible, given its specs). You can also use software that’s designed to verify the true capacity and performance of your card, such as H2testw and FakeFlashTest.
How we tested
We put 13 microSD cards through a series of tests to verify their sequential and random performance. These included benchmarks like CrystalDiskMark, BlackMagic Disk Speed Test, ATTO Disk Benchmark and AJA System Test, as well as a few “real-world” tests. We copied and pasted a small folder of photos about 1.15GB in size to and from each card, then did the same with a larger 12.2GB folder containing multiple file types and subfolders, timing the process each time. We also checked how each card performed on the Steam Deck, downloading games of varying sizes — including Stardew Valley, Aperture Desk Job, Metal Gear Rising: Revengeance and Apex Legends— then timing how long it took to launch each game and load save files.
We used a Kingston USB 3.2 UHS-II reader to test each card on both Windows 11 and macOS Sonoma. For the former, we used an Alienware gaming PC with an Intel Core i9-10900F, Nvidia GeForce RTX 3080 GPU, 32GB of RAM and a 1TB SSD. For the latter, we used a 2021 16-inch MacBook Pro with an Apple M1 Pro chip, 16GB of RAM and a 512GB SSD. To use our card reader on the MacBook, we used Apple’s USB-C Digital AV Multiport Adapter.
We tested the 128GB version of each card wherever possible, though for a few cards — SanDisk’s Extreme and Samsung’s Pro Plus and Pro Ultimate — we were only able to test their 256GB models. We also reformatted each card before testing with the SD Association’s Memory Card Formatter tool.
The Samsung Pro Plus was nearly the fastest card we tested in terms of sequential write performance (around 130 MB/s in CrystalDiskMark) and was a close second in terms of random read/write speeds, so it should work great whether you’re buying for a camera, tablet or gaming handheld. Unsurprisingly, it has all the requisite ratings: U3, V30 and A2. Its sequential read performance (around 165 MB/s) isn’t quite as quick as some of the other cards below, so it’s not the absolute fastest for accessing large files stored on your card, but the difference is small in real-world use.
The main reason the Pro Plus tops our list is because it delivers those strong speeds at a relatively affordable price. The card originally started at $19 for 128GB, $30 for 256GB and $60 for 512GB, but recent sales have brought those models as low as $11, $18 and $29, respectively. When it’s that cheap, the Pro Plus makes most competing microSD cards redundant. Samsung also sells the card with a USB reader that’ll help it reach its maximum speeds for a few dollars more. Either way, the card comes with a 10-year limited warranty.
If you opt to buy the Pro Plus, make sure you get the latest-generation model. Samsung is still selling the prior iteration of the Pro Plus, which looks identical but isn’t as quick. Instead, opt for the one with sequential read speeds rated at 180 MB/s and sequential write speeds rated at 130 MB/s. We tested the 256GB version of the newer Pro Plus due to stock issues with the 128GB model at the time of testing, but this shouldn’t have a major impact on real-world performance, as Samsung rates both cards identically. Right now the card is available up to 512GB, but the company it’ll release a 1TB model later in 2024.
Pros
Consistently quick sequential and random read/write performance
Great value
Easily available at trusted retailers
Cons
Some peers have slightly faster sequential read speeds
The Samsung Pro Ultimate is a step-up model in Samsung’s microSD lineup and, as expected, it’s a little bit faster than the Pro Plus across the board. Its biggest gains are in sequential read speeds, which were the fastest we tested and averaged close to Samsung’s advertised rate rate of 200 MB/s across our various benchmarks. You’ll need to buy the card with Samsung’s USB reader to achieve that performance, but that could be worth it if you regularly move files from your microSD card to a PC. The Pro Ultimate technically led the pack when it came to sequential write and random read/write speeds as well, though the margins there are much less significant compared to the Pro Plus and the other top UHS-I cards we tested.
The main question is cost. If you see the Pro Ultimate available for the same price as the Pro Plus, you might as well grab it instead. It comes with the same 10-year warranty and should be similarly durable. Past discounts have brought the 128GB, 256GB and 512GB models as low as $15, $25 and $45, respectively; that’s still affordable, but the Pro Plus will almost always be a little bit cheaper — and thus a better value for most needs, especially at higher capacities.
Pros
Fastest microSD card we tested (with appropriate USB reader)
If the Samsung Pro Plus ever becomes unavailable, the Kingston Canvas Go Plus is another strong alternative. This is a U3-, V30- and A2-rated card backed by a lifetime limited warranty. Its sequential read speeds trailed only the Samsung Pro Ultimate across CrystalDiskMark, ATTO and the BlackMagic Disk Speed Test. It effectively tied with SanDisk’s Extreme and Nintendo Switch-branded cards in our large file transfer speeds test. Its sequential write speeds (just over 100 MB/s on CrystalDiskMark) are where it lags behind the Pro Plus, but they should still be quick enough for many uses. Its random read/write speeds were only bested by Samsung’s Pro cards in benchmarks, too, so it’s still a good option for apps and games. But it’s hard to justify if you see it priced higher than the Pro Plus or Ultimate.
Pros
Faster sequential write speeds than Pro Plus for a (typically) lower price than Pro Ultimate
The Samsung Evo Select is a clear step behind our top picks, particularly when it comes to sequential write speeds (just under 70 MB/s on CrystalDiskMark), so it’s not ideal for cameras. Still, it’s perfectly usable for many use cases — a Nintendo Switch, for instance — and we’ve previously seen its 128GB, 256GB and 512GB models fall as low as $10, $14 and $25, respectively. All of those are about on par with the SanDisk Ultra, a frequently recommended cheapo card, despite the Evo Select having higher V30, U3 and A2 ratings. While the Pro Plus has come close to those prices, the Evo Select tends to sit there more regularly. The 512GB variant is a particularly great bargain if you just need a chunk of space on the cheap. (The Ultra is available in 1TB and 1.5TB capacities, though.)
Pros
Often available for lower price than Pro Plus
Solid performance if you just want the cheapest acceptable card possible
Cons
Slower than picks above, particularly in sequential write and random performance benchmarks
The SanDisk Extreme and PNY Elite-X. (Photo by Jeff Dunn / Engadget)
Delkin Devices Power
We didn’t use it ourselves, but if you’re willing to pay for a more powerful UHS-II card built for heavy-duty video recording, the Delkin Devices Power has tested well elsewhere and should deliver significantly faster sequential write speeds than our picks above. It’s one of the few UHS-II cards we could actually find in stock, but it costs a ton, with a 128GB model normally priced at $93.
SanDisk microSDXC Card for Nintendo Switch
The SanDisk microSDXC Card for Nintendo Switch is another decent option if you ever see it available for less than the Pro Plus and Canvas Go Plus. Its sequential read speeds were about the same as the latter in our benchmarks, but its sequential writes were slightly slower (and farther behind the Pro Plus). Its random read/writes were a bit behind according to CrystalDiskMark as well. The 128GB version of this card is priced around $18 as of this writing, while the 512GB model costs around $50; both are higher than the Pro Plus. SanDisk backs the card with a lifetime warranty, however, plus it’s available in a 1TB capacity. Note that we tested the Apex Legends version of the 128GB card; SanDisk also sells a Super Mario model, but we can’t speak to whether that one performs any differently.
SanDisk’s Nintendo Switch-branded microSDXC card. (Photo by Jeff Dunn / Engadget)
Lexar Professional 1066x
Similarly, the Lexar Professional 1066x is a decent alternative to the Pro Plus if our main picks are unavailable. It’s another V30, U3 and A2 model, and like Samsung’s card, its sequential write speeds were a bit faster than the Canvas Go Plus and SanDisk Switch card in our benchmarks. Those write speeds weren’t as quick as the Pro Plus, and its sequential reads trailed all three cards. Random read/writes also lagged behind the Pro Plus and Canvas Go Plus, and we noticed its speeds peak and dip more noticeably in our file transfer test. Still, it’s not slow, so depending on its price, it might be a good bargain if you need fast write speeds for video recording and the like. It’s also available in 1TB, plus it comes with a lifetime limited warranty.
SanDisk Extreme
The SanDisk Extreme effectively matched the Pro Plus in a few of our sequential write tests and delivered sequential reads about on par with the Canvas Go Plus, but that was partly due to us only being able to secure the card’s 256GB model, which is higher-rated than the 128GB version. It’s a fine choice if you see it on sale at a reputable seller, but its random performance lagged behind the Samsung Pro and Kingston cards, and it typically costs more. It does have a 1TB model, though.
SanDisk Extreme Pro
The SanDisk Extreme Pro is a rival to the Samsung Pro Ultimate but, as of this writing, is either unavailable at most trusted retailers or priced too high by comparison.
PNY Elite-X
The PNY Elite-X wasn’t too far off the random read/write performance of the Pro Plus and Pro Ultimate in CrystalDiskMark, and it often goes for cheap, but it was well behind in our sequential tests.
As higher resolutions and more frames per second become standard in photography and video creation, the demand for larger, more adaptable storage solutions is growing. In response, manufacturers are developing faster, more user-friendly storage options to meet the rigorous project timelines and extensive data requirements of creative professionals.
Western Digital has unveiled a new SD card for that market, and the SanDisk Extreme PRO SDUC UHS-I memory card packs a staggering 4TB of storage into the popular form factor. Yes, 4TB.
Announced at the NAB Show 2024 in Las Vegas, the 4TB Extreme PRO SDUC UHS-I memory card – along with the 2TB SanDisk Extreme Pro SDXC UHS-I and Extreme Pro microSDXC UHS-I memory cards also revealed at the event – are part of the company’s quest to meet the escalating requirement for the production and storage of more detailed, richer content.
Twice the capacity of microSD cards
The 4TB capacity doubles that of the largest microSD cards, earning it the title for the world’s largest removable memory card. It’s a giant leap from the 32MB of storage SD cards boasted in 1999.
The new card utilizes the Secure Digital Ultra Capacity (SDUC) standard, capable of supporting up to 128TB of storage. Other media card formats available for creative professionals include XQD with a maximum storage capacity of 2TB, and CFexpress, known for its superior speed. Announced last year, the latest generation, CFexpress 4.0, supports up to four PCIe 4.0 lanes and 2GB/s per lane. Neither of those card formats can come close to offering 4TB of storage, however.
Attendees at this year’s NAB show had a preview of the 4TB SanDisk card, which is slated for release in 2025. Pricing details for the new product haven’t been released yet, but don’t expect it to be cheap.
More from TechRadar Pro
Sign up to the TechRadar Pro newsletter to get all the top news, opinion, features and guidance your business needs to succeed!
Memory and storage manufacturer TeamGroup has announced a new microSD card that might just be the best microSD card for the Steam Deck – when it’s available, that is.
The TeamGroup T-Create Expert S.M.A.R.T. MicroSDXC memory card has a 2TB capacity, and while it’s designed more for the creative community, there’s no getting around the fact that its reported read/write speeds and capacity make it ideal for PC gaming handhelds that accept microSD cards as additional storage, like the Steam Deck.
In addition to the speed and capacity, the memory card features ‘S.M.A.R.T.’ software, which lets users to monitor the card’s condition through proprietary software developed by TeamGroup.
The software utilizes flash memory wear detection technology to inform users about the card’s status, giving you a better sense of when the card might be in danger of failing.
In terms of performance, the card boasts read and write speeds of up to 170 MB/s and 160 MB/s, respectively. This isn’t as good as even the flash storage in the base Steam Deck model, much less the ones with a PCIe SSD in them, but if you have a large game library that you want to swap in and out of your main storage drive, this will allow you to keep many more games offline than is currently possible.
When you can you buy it and how much will it cost?
The announcement, as exciting as it might be for some Steam Deck owners, is tempered somewhat by the fact that the card doesn’t seem to be on sale anywhere at the moment, and without any official pricing from TeamGroup we can’t tell you how much you should expect to spend for the added capacity of this card.
As PCGamesN points out, a few 2TB cards have been announced in recent months, only for the cards themselves to never quite make it to market – at least not yet.
Get the hottest deals available in your inbox plus news, reviews, opinion, analysis and more from the TechRadar team.
Whether TeamGroup, which has much better distribution channels than other manufacturers, is able to bring its card to market first remains to be seen, but it will be a windfall for the company if it’s successful – a lot of Steam Deck owners, as well as creatives, will love to get their hands on this one.