acantante Maren Morris El joven de 34 años decidió decirle al mundo que es bisexual y lo hizo orgulloso a través de una publicación en las redes sociales, específicamente durante… Mes del Orgullo LGBTTTIQ+ Específicamente después de una presentación con entradas agotadas en Phoenix el domingo.
Mauricio Usa tu historias de instagram Para confirmar la noticia, en uno de ellos aparece en el escenario ondeando una pequeña bandera con los colores del arcoíris.
¿Por qué se separaron Maren Morris y Ryan Hurd?
Cabe señalar que recién en enero la cantante formalizó oficialmente su divorcio del músico. ryan hurd, Después de un matrimonio que duró cinco años. De acuerdo a Página seis, La operación comenzó el 2 de octubre de 2023 en Hajjah. “Diferencias no negociables”.
El proceso terminó de manera civilizada, luego de que el juez confirmara el acuerdo de liquidación de bienes y declarara la validez del acuerdo prenupcial que existía entre los dos músicos al momento de su matrimonio. El acuerdo de resolución incluirá un pago mensual de $2,100 mensuales Escuché a Morrispara la manutención de su hijo de 4 años, que tendrá la custodia compartida.
Antes de la noticia de la ruptura, no teníamos signos importantes de problemas en la relación. Mauricio Indique que la fecha de su separación es la misma fecha en la que presentó su solicitud.
Unos días antes de solicitar el divorcio, Morris anunció que dejaría atrás la música country porque creía que se había convertido en una “industria” demasiado grande.Pequeñodijo y se sento “Legítimamente satírico” Para saber en qué se había convertido el género y que ya no podía “participar en los brazos realmente tóxicos” de la música country en Nashville.
“Me encanta vivir en Nashville y tengo mi familia”. Dijo en una entrevista con el New York Times Popcast. Añadió: “Hay una razón por la que la gente viene de Los Ángeles y Nueva York a escribir con nosotros. Es porque tenemos grandes compositores allí. Y eso no va a cambiar”.
“Tenemos grandes compositores allí, así que eso no cambiará”. Continúo. “Ya no podía hacer este circo: sentía que tenía que asimilar y explicar el mal comportamiento de la gente y reírme de ello. No pude hacer eso después de 2020 en particular. Había cambiado. Muchas cosas cambiaron en mí hasta ese momento. año.”
El romance comenzó en 2015 luego de una amistad que había durado varios años antes. Se comprometieron oficialmente en 2017 y se casaron poco menos de un año después, en 2018. Su hijo juntos, Hayes, nació en marzo de 2020.
Munich’s annual High End Show is a must for the audiophile – a nerve center for hi-fi’s elite leaders to converge, converse, build wildly expensive sound systems and showcase their oeuvre.
The 2024 show kicked off on Thursday May 9 (10am-6pm) for press and trade visitors only – but on Saturday May 11 (10am-6pm) and Sunday May 12 (10am-4pm) it’s open to the public.
I was lucky enough to be at the MOC München, Lilienthalallee 40, 80939, Munich, Germany for the two press-and-trade-only days. And let me tell you, it was gloriously busy. What follows is a teaser of the sonic delights that caught my eye and ear – from the biggest and wildest of horn speakers to the most notable affordable options and everything in between.
I hope this serves as a taster of what is a truly joyous show for the avid music lover. I’m only sad I cannot supply you with a nice cold stein or a pretzel…
1. Feeling that bass through Aries Cerat’s huge horn system
Image 1 of 3
(Image credit: Future)
(Image credit: Future)
(Image credit: Future)
Huge horn loudspeaker fans were exceptionally well served in Munich this year. And the behemoth of the bunch? This entire Aries Cerat system, including amplification, horn speaker units that actually look like giant maracas from side-on, plus bass units bigger than a Parisian apartment I once lived in.
This is one of the largest exhibition rooms at High End Munich – and it needed to be, since speakers of this scale tend to reveal their true worth from a relative distance, in my opinion. That said, when James Blake’s Limit to your Love (often affectionately renamed ‘limit to your sub’ in audio circles, since it really is a true test of what your system’s low end is capable of) came on, it didn’t matter where I stood, this system delivered the feels.
Pricing? We couldn’t possibly say. But if you need to ask the Limassol Cyprus specialist for a price list, just the Ianus Essentia power amps seen in the image above may be a little rich for the blood…
Get the hottest deals available in your inbox plus news, reviews, opinion, analysis and more from the TechRadar team.
2. Q Acoustics’ 3050c affordable speakers standing up against the competition
Image 1 of 3
(Image credit: Future)
(Image credit: Q Acoustics)
(Image credit: Q Acoustics)
In stark contrast to many of the towers of power you’ll see at High End Munich, Q Acoustics’ offering hails from a different price bracket entirely. The UK speaker specialist’s dearest speakers in the new 3000c range are the $1,199 / £899 €1,199 (in the region of AU$1,820) 3050c floorstanders. And they sounded a treat for the money.
Considering Sonus Faber was also showcasing its excellent Suprema system at the event (which, for reference, costs as much as 16 new Tesla Model 3s) it’s a bold move – and one I applaud. I love the fact that here is a product I could afford, and while this obviously isn’t a full review, there were moments of sonic greatness at the listening session, with a broad and immersive presentation considering their bijou footprint.
3. Hearing Frank Zappa on Vivid Audio’s Moya 1, with Laurence Dickie
Image 1 of 3
(Image credit: Future)
(Image credit: Future)
(Image credit: Future)
Laurence Dickie, the revered loudspeaker engineer behind Bowers & Wilkins Nautilus and now the technical director of Vivid Audio (a brand he founded), cuts a fine figure standing next to the eight (yes, eight) side-firing bass drivers he built into his own personal lockdown project, the incredible Moya 1.
These side-firing drivers (there are four on opposing sides) have a 22.5cm alloy diaphragm and can handle 800W apiece, but we’re not done: each tower actually boasts 13 drivers, because you have to factor in the two front-firing 17.5cm carbon fiber-reinforced mid/bass drivers, the single 100mm mid-range driver and those two ‘Diamond-Like Coated’ (DLC) aluminium alloy modules – a 50mm dome for the upper mids and a 26mm tweeter.
How much? Oh, somewhere in the region of a cool $500,900 / £400,000 / AU$750,000.
It’s abundantly clear that Dickie is a fanatical perfectionist, but he’s also a music-lover. After our all-too-brief listening session, he quips, “As a teenager Frank Zappa was one of my main influences. And it’s taken me this long to use it in a demo!”
The room laughs, but he quickly adds, “Look, I’m an engineer. That means I like to understand everything – I need to know why I’m doing it. But we should never forget that we’re just a window to the work of the artist. So, go and enjoy your music!”
4. Burmester BX100: possibly the most surprising speakers at High End
Image 1 of 3
(Image credit: Future)
(Image credit: Future)
(Image credit: Future)
This vision in burgundy red (although Burmester will fashion you a set in another color, including the emerald green of your Maybach if you’d prefer) might just be one of the most surprising speaker designs at High End Munich.
With it’s freestanding central AMT tweeter (there’s space cut away behind it) and hidden side-firing drivers, this four-way floorstanding speakers’ silhouette looks like an ‘X’ (hence the BX100 moniker, we imagine).
At the listening session, we heard Elvis’ rendition of Fever (a longstanding tradition at Burmester during the High End show) and the clarity through that tweeter was nothing short of exceptional.
The Burmester BX100 speakers cost €75,700 for the standard finishes (official prices for the rest of the world are unknown) or €80,000 if you opt for one of the company’s special finishes – and probably a little more if you’d like something custom.
5. Dancing to techno on Dali’s Rubikore 8
Image 1 of 3
(Image credit: Future)
(Image credit: Future)
(Image credit: Future)
It’s not often you get to hold the driver cone used within the speakers you’re about to listen to, but Dali wants you to understand the technology it has implemented. And holding the company’s 6.5-inch paper and wood fiber Clarity Cone Technology SMC bass/midrange drivers (used throughout Dali’s new Rubikore range) I’m struck by its incredible lightness and rigidity.
Last year, I listened to Snoop Dogg on Dali’s Epikore 11 speakers and this year, the company didn’t disappoint with an unusual post-listening session choice, giving me some Rapture STRLGHT (see CozySounds ).
Here, the Dali Rubikore S8 aren’t afraid to open out and give me that thumping bassline. You can also feel the AMT/dome hybrid tweeter extension within the track’s choral voices and honestly, for something so slim, the sound here is huge.
Dali’s Rubikore 8 cost £5,999 per pair, and although official pricing for the rest of the world isn’t yet known, that’s in the region of $7,515 / AU$11,345.
Astera Labs, a relatively unknown semiconductor company with a $10 billion market value, recently showed off its new Aries 6 PCIe retimer board, which it is now sampling to leading AI and cloud infrastructure providers.
Due to the high-speed data transfer within the PCIe interface, the signals can suffer from degradation, especially over longer distances or due to interference. A PCIe retimer helps maintain the data signal integrity over the PCIe interface by cleaning, reshaping, and retransmitting the data signals.
The Aries 6 retimers, the first in Astera Labs’ PCIe 6.x portfolio, offer robust, low power, and efficient PCIe 6.x and CXL 3.x connectivity, squarely aimed at catering to the networking requirements of next-generation GPUs, accelerators, CPUs, and CXL memory controllers.
3x the reach
Based on Intel‘s Retimer Supplemental Specification, the new Aries 6 retimers build upon the company’s widely deployed PCIe 5.0 retimer portfolio and reportedly extend reach distance by three times the standard rate.
Casey Morrison, Chief Product Officer, Astera Labs, said, “PCIe 6.x technology’s superior bandwidth is required to handle data-intensive workloads and to maximize utilization of AI accelerators, but the faster speeds introduce new signal integrity issues in hyperscale platforms. Aries Smart DSP Retimers have set the gold standard for addressing critical PCIe/CXL connectivity challenges with a solid track record of robust performance and seamless interoperability. We’re proud that our third generation of Aries Retimers with support for PCIe 6.x, PCIe 5.x, and CXL 3.x have now been sampled to leading AI and cloud platform providers.”
ServeTheHometook a first look at Astera Labs’s new portfolio at Nvidia GTC 2024 (see the photograph above) and observed that the “Aries 6 was linked at PCIe Gen6 x16 speeds at 10-11W of power consumption. That is a big deal since it is lower than Broadcom is claiming with its new retimers.“
Many major AI firms are excited about the imminent arrival of Astera Labs’ new generation Aries Smart DSP Retimers. Raghu Nambiar, Corporate Vice President, Data Center Ecosystems and Solutions, AMD, said, “Our close collaboration with Astera Labs on PCIe technologies ensures our customers’ platforms continue to meet the higher bandwidth connectivity requirements of next-generation AI and HPC workloads,” while Brian Kelleher, Senior Vice President of GPU Engineering, Nvidia, added, “Astera Labs’ new Aries Smart DSP Retimers with support for PCIe 6.2 will help enable higher bandwidth to optimize utilization of our next-generation computing platforms.”
Sign up to the TechRadar Pro newsletter to get all the top news, opinion, features and guidance your business needs to succeed!
There have been several rumors in recent weeks about Apple’s work on a finger-worn smart ring, and while it’s not clear if the project is in active development at this time, we thought we’d round up the rumors that are circulating.
Samsung’s upcoming Galaxy Ring
This guide aggregates what we’ve heard so far on an Apple-branded smart ring.
Potential Features
A February rumor from Electronic Times suggested that Apple is “speeding up development” on a smart ring with health-related features.
Like the Apple Watch, an Apple Ring could track heart rate, activity, sleep, and respiratory rate, using that information to provide users with sleep insights and health recommendations.
Apple could also potentially use a smart ring as an input device for the iPhone, iPad, Vision Pro, or Mac.
Ring vs. Watch
Apple already has an Apple Watch that is able to track multiple health metrics, but a smart ring would be more comfortable for certain activities. A ring could be preferable for sleep, for example, or in situations where the wrists need to be covered, like when wearing supportive wrist wraps.
A ring would not likely need a constant connection to an iPhone or another Apple device because it has no display, so the battery would probably last for a longer period of time. On the downside, a smart ring would convey information via Bluetooth or a similar method, so while it would collect data, that data would not be synced to the iPhone in real-time as it is with the Apple Watch.
There is a possibility that a smart ring would be more affordable than the Apple Watch, with higher-end smart rings priced at around $300 from Apple’s competitors.
Apple’s Competition
Samsung is developing a Galaxy Ring that is expected to be available in the second half of the year. It can track heart rate, activity, and sleep, plus it is able to make wireless payments and control Samsung devices.
Companies like Oura and Ultrahuman have been making and selling smart rings for several years. The third-generation Oura ring is able to collect activity information and measure heart rate, respiratory rate, and sleep quality.
The Ultrahuman Ring Air measures heart rate, skin temperature, respiratory rate, recovery times, and sleep.
Ring Patents
Apple has patented smart ring technology. One patent, for example, explains how a smart ring (or several smart rings) could be used as a control method for a VR headset. Sensors in the ring would gather input from the user, and haptic output could provide feedback.
Another patent describes using a ring with a touch-sensitive display to control a TV or tablet, while a third outlines a smart ring with NFC.
Release Date
While Electronic Times said that Apple is seriously considering a smart ring, Bloomberg‘s Mark Gurmanclaimed in February that Apple is not actively developing a finger-worn device at this time.
Apple’s industrial design team did present the idea of a smart ring focused on health and fitness to executives a few years back, but it may not be a project that Apple is planning to bring to market right now.