Categories
Featured

OpenAI’s new voice synthesizer can copy your voice from just 15 seconds of audio

[ad_1]

OpenAI has been rapidly developing its ChatGPT generative AI chatbot and Sora AI video creator over the last year, and it’s now got a new artificial intelligence tool to show off: Voice Generation, which can create synthetic voices from just 15 seconds of audio.

In a blog post (via The Verge), OpenAI says it’s been running “a small-scale preview” of Voice Engine, which has been in development since late 2022. It’s actually already being used in the Read Aloud feature in the ChatGPT app, which (as the name suggests) reads out answers to you.

[ad_2]

Source Article Link

Categories
Business Industry

Qualcomm’s new audio chips make affordable earphones sound better

[ad_1]

Qualcomm has announced two new audio chips for wireless earphones and headphones: S3 Gen 3 and S5 Gen 3. Both these audio chips claim to make more affordable wireless earphones sound better through advanced connectivity features and AI-powered audio technologies.

Qualcomm S3 Gen 3 and S5 audio chips bring Bluetooth 5.4 LE and Auracast support

Qualcomm’s S3 Gen 3 and S5 Gen 3 chips bring audiophile-grade audio quality, high-quality audio codecs, more effective Active Noise Cancellation (ANC), improved call quality, and longer battery life to wireless earbuds and headphones. These audio chips sit below Qualcomm’s flagship audio chips: S7 and S7 Pro.

Qualcomm S3 Gen 3 S5 Sound Audio Chips Features

Qualcomm S3 Gen 3

The S3 Gen 3 is an audio chip for mid-tier earbuds, mid-tier headphones, and wireless speakers. It has all the essential features, including support for ANC, aptX Adaptive, aptX Lossless (24-bit 48kHz), Bluetooth 5.4 with LE Audio, Bluetooth Auracast, and Spatial Audio. It also features an improved Digital-To-Analog (DAC) converter for improved audio quality and lower noise (hissing sound at low volumes).

Qualcomm S3 Gen 3 Audio Chip Features

It supports Alexa and Google Assistant with wake word activation. It also supports Google Fast Pair for faster pairing. Thanks to the support of up to three microphones on each earbud (left and right), voice calls should be clearer.

Qualcomm S5 Gen 3

The S5 Gen 3 has more features than the S3 Gen 3. It is for premium earbuds/headphones (one step below flagship) and wireless speakers. Qualcomm says this new chip has 50% more memory and significantly more DSP processing power than the S5 Gen 2, bringing improved audio quality while gaming and listening to music. It also features improved ANC and echo cancellation.

Qualcomm S5 Gen 3 Audio Chip Features

This chip supports Bluetooth 5.4 with LE Audio, Bluetooth Auracast, and Spatial Audio. It features aptX Adaptive and aptX Lossless (24-bit 48kHz) audio codecs for higher audio quality. Adaptive ANC and Adaptive Transparency features are also supported.

Watch our review of the Galaxy Buds 2 Pro in the video below.

The S3 Gen 3 and S5 Gen 3 audio chips will soon be available to earphone makers, and we can expect earbuds featuring these chips to hit the market later this year or early next year. Samsung uses Qualcomm’s chips in some of its wireless earbuds, but there is no confirmation if it will use the S3 Gen 3 or S5 Gen 3 in its future Galaxy Buds.

[ad_2]

Source Article Link

Categories
Featured

Getting into hi-res audio? This is the hi-res player and headphones I recommend

[ad_1]

Hi-res audio can be a cruel mistress. You’d be forgiven for thinking two five-star products joined in union will surely bring high fidelity sound to your ears, but, as anyone who’s connected a set of high-impedance IEMs to a hi-res DAP (even if it’s one of the best portable audio players hooked up to some of the best wired headphones) knows, it’s just not that simple. 

Why? Because said player may not have the oomph or power to fire up your earphones’ multiple drivers to their full potential, that’s why. And that means you’ll need a separate headphone amp (often bundled in with some of the best portable DACs), which may affect the sonic characteristics of your chosen player’s onboard digital-analog-converter. 

[ad_2]

Source Article Link

Categories
Entertainment

The pocket-sized Boss Katana:Go headphone amp doubles as an audio interface

[ad_1]

There are plenty of that plug directly into instruments like electric guitars and basses, but Boss just kicked things up a notch. The company has announced the and it’s a doozy, with a combination of features I’ve never seen together in one little box.

Just like rival products, this thing plugs into the input jack of a preferred instrument and includes a headphone jack to hear what’s going on. Guitar players can choose from ten amp models and bassists get three amp models, each pulled from the pre-existing Katana line of modeling amplifiers. Boss Katana amps are known primarily for their surprisingly great selection of tones, and it looks like the company managed to squeeze those same models into a headphone amp. Rival products are certainly convenient, but don’t always sound that great.

There are 60 effects to choose from, with all of the reverbs, delays and, of course, choruses musicians have come to expect from Boss. These are also the same effects featured in the larger and pricier combo amps.

So, there are good amp tones and a robust lineup of effects. What sets the Katana:Go apart from, say, the Mustang Micro? First of all, there’s a built-in tuner, which is always a welcome addition. The Katana:GO also includes spatial audio tech to mimic a live setup, further enhancing its usefulness as a practice amp. It remains to be seen how realistic this sounds, but Boss says it lets users position a virtual amp in different locations to give the impression of playing on stage or “jamming in a room with friends.” I’ve used many of these amps before and have found the “in your face” nature of the headphone signal rather off-putting, so I’m intrigued by this feature.

The amp has 30 preset slots, for creating and saving unique tones, and integrates with the . This allows users to trade presets like Pokémon. Okay, not quite like Pokémon, but you get the gist.

A guitar player using the mobile app.

Boss

The Katana:GO even doubles as an actual USB audio interface. Just plug it into a computer, smartphone or tablet and record straight into a DAW. Finally, there’s a dedicated mobile app, with the ability to jam along to songs from streaming sites or a personal library. This is especially handy for getting that daily practice session in, and there’s a looping feature for nailing down difficult segments.

Just like the other headphone amps on the market, it folds up neatly and easily fits into a standard gig bag. The Boss Katana:GO costs $120 and, incidentally, is the same price as the Mustang Micro, which doesn’t double as an audio interface or include a built-in tuner. It’s available to purchase right now.

[ad_2]

Source Article Link

Categories
Life Style

The neuroscientist formerly known as Prince’s audio engineer

[ad_1]

Prince performs onstage during the 1984 Purple Rain Tour

Musician Prince on stage in Detroit, Michigan, during his 1984 Purple Rain tour.Credit: Ross Marino/Getty

Working scientist profiles

This article is part of an occasional Nature series in which we profile scientists with unusual career histories or outside interests.

In 1983, Susan Rogers got a call that would change her life. She was working as an audio technician in the music industry in Los Angeles, California, when an ex-boyfriend got in touch to tell her that the musician Prince was looking for a technician.

Rogers, who at the time was one of the few female audio technicians in the United States — and maybe even the world — was already a Prince fan. His work reminded her of the soul music she had grown up listening to in the 1960s and 1970s in southern California — artists such as Sly and the Family Stone and Al Green, but with a contemporary, punk edge.

By this point, Prince had just released his album 1999. Rogers, who was 27 at the time, would begin working with him on Purple Rain, the record that would launch him into global superstardom.

She spent four years working with Prince in his home recording studio in Minneapolis, Minnesota, leaving a year before the opening of Paisley Park, Prince’s now-legendary creative and performing space. By this point, she had graduated from being an audio technician — maintaining and repairing equipment — to recording engineer, a role that has much more influence over the whole sound of a record.

“I was talking to some Prince alumni recently and they were saying ‘poor Susan, she never even got Christmas Day off’. There’s no ‘poor Susan’ about it — I was working with my favourite artist and there was nowhere I would rather be,” she says.

After Prince, she went on to work with other musicians, such as the Canadian rock group Barenaked Ladies and David Byrne, former lead singer of the new-wave band Talking Heads. At the age of 44, and with the help of the royalties she earned on the Barenaked Ladies album Stunt, she quit the music industry (see ‘Quick-fire questions’).

Higher education had not been an option growing up — her mother died when she was 14 and Rogers was married aged 17. She escaped that unhappy relationship after three years and headed to Hollywood, where she got a job as a trainee audio technician.

Susan Rogers works at FAME Studios

Susan Rogers trained as a recording engineer before pivoting to neuroscience. She continues to produce music, such as for US singer-songwriter Jeff Black.Credit: Madison Thorne

Over the years, she increasingly felt the pull of academia and a calling to study the natural world. So, in 2000, she began her undergraduate degree in neuroscience and psychology at the University of Minnesota. Initially, she wanted to study consciousness in non-human animals, but was advised that a more meaningful contribution would be a neuroscience degree that would also enable her to study music perception and cognition. She then did her doctoral work at McGill University in Montreal, Canada. Returning to education after so many years was not as difficult as she had feared — and years spent learning the intricacies of a recording console helped her to understand the complexity of the human brain.

Her PhD research focused on auditory memory. She designed experiments to test short-term memory for musical intervals, in which musicians and non-musicians listened to a piece of music containing consonance (harmonious sounds) and dissonance (clashing or unexpected sounds). The most interesting observation was that, for both groups, short-term auditory memory lasted longer than was previously thought, she says. At the time of her doctoral work, psychologist István Winkler and his colleagues had reported that auditory short-term memory persisted for roughly 30 seconds1, but Rogers’s work demonstrated it lasting for 48 seconds.

A good ear and a sound work ethic

One of Rogers’s PhD supervisors was Daniel Levitin, a cognitive psychologist, musician and record producer whose research focuses on music perception. He knew of Rogers from her work with Prince and Barenaked Ladies, and took her on “in a heartbeat”. “She was Prince’s engineer — that’s one of the top engineering jobs in the world,” he says.

Her years in the music industry greatly enhanced her academic work, he says. It gave her an astonishing work ethic and helped her to hone her all-important listening skills.

“What auditory neuroscience requires is a good ear. You’re designing experiments and you need to be able to hear subtle details that others might not hear so that you know you’ve prepared your experiments correctly. Susan has a great ear.”

Levitin describes her as very musical, “even though she doesn’t play an instrument”. As a producer, he explains, her job was to coax out of the musician “the most authentically emotional performance you could get”. “Miles Davis told her she was a musician. He didn’t throw around that term lightly,” he says of the renowned jazz bandleader and composer.

In 2008, Rogers joined Berklee College of Music in Boston, Massachusetts, where she teaches music production and engineering. She is also writing a course on music and neuroscience for the college’s online programme.

She has investigated what people visualize when they listen to music, and plans to publish the results. Some people, including Rogers, imagine the musicians playing; others make up stories based on the lyrics; and for some — particularly older people — music triggers memories. Interestingly, musicians and non-musicians do not differ greatly in their visualizations.

“One of the least musical people that I know — somebody who would almost be called tone deaf — reports that he sees abstract shapes and colours when he listens to music. And two of the finest musicians I know also visualize abstract shapes and colours. I can’t even imagine having that visualization to music,” she says.

Throughout her successful music career, Rogers admits that there were times when she felt like a bystander in the studio — because she does not play an instrument or compose, her views felt secondary to those of the professional musicians. But in her career as an academic and teacher, she is very much at home.

“Nothing in my life has brought me more joy than scientific pursuit. It is as creative as anything I ever did while making records. Had I realized in my youth that a career in science was possible for me, my hunch is that I could have made a more notable contribution. Earning a PhD at age 52 doesn’t permit that,” she says.

Common cause

Rogers also thinks that musicians and scientists have more in common than one might guess — both need to be open-minded and be able to separate relevant and irrelevant information. “The fashion and the hairstyles are different — musicians have the edge there — but there are more similarities than differences,” she says.

How else are the two professions similar? “It takes guts to commit to a music career because there is no comfortable path and absolutely no light to guide you, other than your own internal one,” says Rogers. “I’ve had the privilege of knowing some outstanding scientists and my perception is that they, too, are driven more by scratching an intellectual itch than by winning a prize or being famous.”

That feeling of being a bystander in the music industry receded when she realized that listening is an “indispensable component of what music is”, as she explains in her 2022 book, co-authored with neuroscientist Ogi Ogas, This is What it Sounds Like: What the Music You Love Says About You.

“Practically speaking, without a listener, music does not exist. By perceiving, feeling and reacting to the many dimensions of a song, a listener closes the creative circle and completes the musical experience,” she writes.

Levitin thinks that one of Rogers’s main contributions through her writing and public speaking has been to elevate the importance of the listener.

“She’s also adding the social context by which we listen, and by which we decide what we like, and the developmental stages we go through as listeners, from listening to children’s nursery rhymes to more sophisticated things,” he says. Her book, he adds, is a perfect example of what a popular-science work and science communication should be — it does not dumb down the science or patronize its audience, but neither does it aim so high that it’s impenetrable.

Rogers hopes that, one day, all music courses will include a unit on music cognition to help creators to understand how listeners receive their craft.

“It won’t help you in the studio and it won’t help you while you’re composing. And I don’t think it should — when we’re creating works of art, we shouldn’t be thinking too deeply about the nuts and bolts,” she says. That said, a music-cognition course can help music creators to understand their audiences, “just like a chef needs to understand what food tastes like”, she adds.

When she finally left Prince and began working with other musicians, she felt she had to unlearn some elements of Prince’s intense working habits.

“Prince was doing a song a day when I was with him. That was every day. That’s how we worked,” she says.“He also had an exceptional ear for arrangement. He could foresee how the end product was going to turn out in such a way that each part — drums, bass, guitars, keyboards, backing vocals — was recorded with an ear for the subsequent parts. He had a watchmaker’s skill of putting the individual parts together to create a whole.”

She still loves listening to music and discovering new artists, particularly with the help of her students, but she remains true to soul, her first musical love.

“As Prince used to say, soul is the street I live on,” she says.

Quick-fire questions

What music do you listen to when working?

I can’t have music on in the background because it’s such a powerful attractor. If something comes on the radio while I’m driving, I have to turn it down and remind myself to pay attention to the road.

What has been your career highlight?

Working with Prince was obviously a great star in the firmament. But being the producer on the Barenaked Ladies album Stunt was amazing — it went multi-platinum. I’ve had a short science and teaching career but receiving a distinguished teaching award at Berklee was also gratifying.

Did you ever speak to Prince about your research?

Sadly, no. The last conversation I had with Prince was around 1997, before my university education. If we’d had a chance to talk about my research, he would have argued with me on every point, which would have been welcome. I heard him say that if he’d gone into something other than music, he would have liked teaching. With his creativity, intelligence and self-discipline, he would have been an outstanding researcher.

Do you have a memorable mentor?

Musically, the producer Tony Berg taught me a lot. He hasn’t sold as many records as others, but he has influenced so many people. Stephen McAdams at McGill University would be my scientific mentor — he took over supervising my PhD because Daniel Levitin was on a book tour. He is a world expert on timbre perception and is everything a scientist should be — kind, generous of spirit, funny.

Is there any music you don’t enjoy listening to?

I used to have zero interest in heavy-metal music, but two of my students shared their love of it with me, and, as good listeners, they explained why it was so great. I picked up on their love for it. Sometimes we don’t like something because we don’t know it well enough.

If you could save only one record from your collection, what would it be?

It’s so hard to choose when you love so many things, but just off the top of my head I’d probably choose Al Green’s Greatest Hits album.

This interview has been edited for length and clarity.

[ad_2]

Source Article Link

Categories
Entertainment

20 years of Bluetooth audio

[ad_1]

“When you think about the history of Bluetooth, and specifically about audio, you really have to go back to the mid-to-late ’90s.”

Chuck Sabin is a Bluetooth expert. As a senior director at Bluetooth Special Interest Group (SIG), he oversees market research and planning as well as business development. He’s also leading the charge for emerging uses of Bluetooth, like Auracast broadcast audio. In other words, he’s an excellent person to speak to about how far Bluetooth has come — from the days of mono headsets solely used for voice communication to today’s devices capable of streaming lossless-quality music.

In the mid ’90s, mobile phones were starting to become a thing, and of course so were regulations about hands-free use of them in cars. Sabin previously worked in the cellular industry, and he remembers how costly and intrusive the early hand-free systems were in vehicles. Bluetooth originated from cell phone companies working together to cut the cord to headphones since using those not-yet-wireless audio accessories in the car was cumbersome. One of the first mobile phones with Bluetooth was from Ericsson in the late ’90s, although an updated model didn’t make it to consumers until 2001. That same year, the IBM ThinkPad A30 became the first laptop with Bluetooth built in. At that time, the primary intent of the short-range radio technology was for voice calls.

Bose Introduces the Bose Bluetooth Headset Series 2

The Bose Bluetooth Headset Series 2 (Bose)

“You had a lot of people who ended up with these mono headsets and boom mics,” he explained. You know, the people we all probably made fun of — at least once. Most of these things were massive, and some had obnoxious blinking lights. They’re definitely a far cry from the increasingly inconspicuous wireless earbuds available now.

Bluetooth as a specification continued to evolve, with companies leveraging it for music and streaming audio. To facilitate music listening, there had to be faster communication between headphones and the connected device. Compared with voice calling, continuous streaming required Bluetooth to support higher data speeds along with reduced latency. Where Bluetooth 1.0 was call specific, version 2.0 began to achieve the speeds needed for audio streaming at over 2 Mb/s. However, Sabin says, the 2.1 specification adopted by Bluetooth SIG in 2007 was when all streaming audio capabilities were implemented in automobiles, phones, headphones, headsets and more.

Of course, it would still be a few years before wireless headphones were mainstream. In the early 2000s, headphones were still directly connected to a mobile phone or other source device. Once Bluetooth became a standard feature in all new phone models, as well as its inclusion in laptops and PCs, consumers could count on wireless connectivity being available to them. Even then, music had to be loaded onto a memory card to get it on a phone, as dedicated apps and streaming services wouldn’t be a thing until the 2010s.

“The utility of the device that you carried around with you all the time was evolving,” Sabin said. “Bluetooth was ultimately riding that continued wave of utility, by providing the opportunity to use that phone as a wireless streaming device for audio.”

Bragi Dash true wireless earbuds

Bragi Dash true wireless earbuds (Photo by James Trew/Engadget)

About the time wireless headphones had become popular, a few companies arrived with a new proposition in 2015: true wireless earbuds. Bluetooth improvements meant reduced power requirements leading to much smaller devices with smaller batteries — and still provide the performance needed for true wireless devices. Bragi made a big splash at consecutive CESs with its Dash earbuds. The ambitious product had built-in music storage, fitness tracking and touch controls, all paired with a woefully short three-hour battery life. Perhaps the company was a bit overzealous, in hindsight, but it did set the bar high, and eventually similar technologies would make it into other true wireless products.

“Companies that were building products were really starting to stretch the specification to its limits,” Sabin explained. “There was a certain amount of innovation that was happening [beyond that] on how to manage the demands of two wireless earbuds.” Bluetooth’s role, he said, was more about improving performance of the protocol as a means of inspiring advances in wireless audio devices themselves.

He was quick to point out that, for the first few years, true wireless buds accepted the Bluetooth signal to only one ear and then sent it to the other. That’s why the battery in one would always drain faster than the other. In January 2020, Bluetooth SIG announced LE Audio at CES as part of version 5.2. LE Audio delivered lower battery consumption, standardized audio transmission and the ability to transmit to multiple receivers — or multiple earbuds. LE Audio wouldn’t be completed until July 2022, but it offers a lower minimum latency of 20 to 30 milliseconds versus 100 to 200 milliseconds with Bluetooth Classic.

“All of the processing is now done back on the phone itself and then streamed independently to each of the individual earbuds,” Sabin continued. “That will continue to deliver better performance, better form factors, better battery life and so on because the processing is being done at the source level versus [on] the individual earbuds.”

The increased speed and efficiency of Bluetooth has led to improvements in overall sound quality too. Responding to market demands for better audio, Qualcomm and others have developed various codecs, like aptX, that expand what Bluetooth can do. More specifically, aptX HD provides 48kHz/24-bit audio for wireless high-resolution listening.

“One of the elements that came into the specification, even on the classic side, was the ability for companies to sideload different codecs,” Sabin explained. “Companies could then market their codec to be available on phones and headphones to provide enhanced audio capabilities.”

LE Audio standardizes Bluetooth connectivity for hearing aids, leading to a larger number of supported devices and interoperability. The use cases range from tuning earbuds to a user’s specific hearing or general hearing assistance needs, with or without the help of active noise cancellation or transparency mode, to simply being able to hear valuable info in public spaces via their earbuds or hearing aid.

“Bluetooth is becoming integral for people with hearing loss,” he explained. “Not only for medical-grade hearing aids, but you’re seeing hearing capabilities built into consumer devices as well.”

Sony Electronics' CRE-E10 self-fitting OTC hearing aids

Sony’s CRE-E10 OTC hearing aids (Sony)

Sabin also noted how the development of true wireless earbuds have been key for people with hearing loss and helped reduce the stigma around traditional hearing aids. Indeed, companies like Sennheiser and Sony have introduced assistance-focused earbuds that look no different from the devices they make for listening to music or taking calls. Of course, those devices do that too, it’s just their primary aim is to help with hearing loss. The boom, which has been going on for years, was further facilitated by a 2022 FDA policy change that allowed over-the-counter sale of hearing aids.

One of the major recent developments for Bluetooth is broadcast audio, better known as Auracast. Sabin described the technology as “unmuting your world,” which is exactly what happens when you’re able to hear otherwise silent TVs in public spaces. You simply select an available broadcast audio channel on your phone, like you would a Wi-Fi network, to hear the news or game on the TV during your layover. Auracast can also be used for things like PA and gate announcements in airports, better hearing at conferences and sharing a secure audio stream with a friend. Companies like JBL are building it into their Bluetooth speakers so you can link unlimited additional devices to share the sound at the press of a button.

“You’re seeing it in speakers, you’ll see it in surround sound systems and full home or party-in-a-box type scenarios,” he said. Sabin also noted that applications beyond the home could simplify logistics for events, since Auracast audio comes from the same source before it’s sent to a PA system or connected earbuds and headphones with no latency. Sabin said the near-term goal is for Bluetooth audio to be as common in public spaces as Wi-Fi connectivity, thanks to things like Auracast and the standard’s constant evolution.

Even after 20 years, we’re still relying on Bluetooth to take calls on the go, but both the voice and audio quality have dramatically improved since the days of the headset. Smaller, more comfortable designs can be worn all day, giving us constant access to music, podcasts, calls and voice assistants. As consumer preferences have changed to having earbuds in at all times, the desire to tune into our surroundings rather than block them out has increased. “Unmuting your world” is now of utmost importance, and the advancement of Bluetooth technology, from the late ’90s through LE Audio, continues to adapt to our sonic preferences.


Engadget 20th anniversary banner

To celebrate Engadget’s 20th anniversary, we’re taking a look back at the products and services that have changed the industry since March 2, 2004.

[ad_2]

Source Article Link

Categories
Featured

OpenAI’s Sora will one day add audio, editing, and may allow nudity in content

[ad_1]

OpenAI’s Chief Technology Officer Mira Murati recently sat down with The Wall Street Journal to reveal interesting details about their upcoming text-to-video generator Sora.

The interview covers a wide array of topics from the type of content the AI engine will produce to the security measures being put into place. Combating misinformation is a sticking point for the company. Murati states Sora will have multiple safety guardrails to ensure the technology isn’t misused. She says the team wouldn’t feel comfortable releasing something that “might affect global elections”. According to the article, Sora will follow the same prompt policies as Dall-E meaning it’ll refuse to create “images of public figures” such as the President of the United States. 

[ad_2]

Source Article Link

Categories
Featured

Audio Pro C20 review: a wireless speaker that offers even more, and sounds even better

[ad_1]

Audio Pro C20: Two minute review

The Audio Pro C20 has a lot of connectivity options. As anyone familiar with the category of best wireless speakers knows, a box of drivers that’s able to harness your home’s Wi-Fi network can offer superior sound to that afforded by a Bluetooth connection, whether music is accessed via Google Cast, Apple’s AirPlay, ‘connected’ services such as Tidal Connect (which actually lets you stream losslessly in 24-bit hi-res, where AirPlay taps out at 16-bit CD quality) or a dedicated multi-room app such as the Audio Pro Control app. And the Audio Pro C20 offers all of this. 

But just quickly, let’s explain why Audio Pro’s latest wireless speaker is worth your time from a technical perspective. First off, pinging music over Bluetooth from phone to speaker incurs compression. Wi-Fi’s higher bandwidth means you can listen in (very) high resolution, up to 24-bit/192kHz. Now, a Wi-Fi enabled speaker accesses your chosen tunes from the internet (or local drive connected to it) rather than from your phone itself – and if you walk into another room or take a call, as long as you stay within range of your Wi-Fi router, the music keeps playing.

Why explain this in the intro to a product review? Because Audio Pro gets it. The Swedish company’s been in the game for 40 years and the firm gets that we want more than one open gate leading to our music. Also, we now have plenty of kit we’d like to physically connect our shiny new speaker to, if possible (and thank you very much in advance). So, on top of Wi-Fi and Bluetooth streaming, Audio Pro has added to the sizeable C20 a compelling array of ports on the back: an RCA in (for turntables with an RIAA amp), a phono MM in (for moving-magnet cartridge decks without a phono stage), an RCA sub out (if you wanted to connect a dedicated subwoofer to it), a Toslink Optical in (for CD players or budget soundbars, say) and the arguably the biggest draw of the lot – an HDMI ARC in, so it can go straight into your TV and challenge some of the best soundbars. So long as it’ll fit beneath it without obscuring the screen, that is. 

Audio Pro C20 on a table, with a mug of coffee and a smartphone beside it

The grille attaches easily with magnets and offers clean lines, if you want those…  (Image credit: Future)

What you need to know is this: this thing sounds fantastic, offering clarity, depth, excitement and finesse, even at higher volumes. The control app is easy to navigate and corrals all of your chosen music streaming services – but of course, you could go into each app on your phone and click the little Google cast or AirPlay icon to see the C20 ready to connect.

[ad_2]

Source Article Link

Categories
Bisnis Industri

FocusRite Scarlett audio interface masters setup’s sound

[ad_1]
Focusrite Scarlett 2i4 USB Audio interface
This audio interface turns your Mac into a music studio for two microphones and two instruments.
Photo: Focusrite
If you’re going to make and manipulate music or other sound with your Mac setup, odds are you need a good audio interface. Today’s Mac Studio workstation relies on a Focusrite Scarlett 2i4 USB audio interface when the user makes YouTube videos, for example. Check it out below, along with the rest of the setup’s gear.

This post contains affiliate links. Cult of Mac may earn a commission when you use our links to buy items.

Focusrite Scarlett audio interface masters Mac Studio setup’s sound

Redditor bucketofmonkeys (“Monk”) showcased the setup in a post entitled, “New Mac Studio M2 Max setup.” On Monday we covered his refurbished M2 Max Mac Studio and Studio Display. On Wednesday we zeroed in on his Keychron K8 tenkeyless mechanical keyboard. Today is all about his Focusrite Scarlett 2i4 USB audio interface. That’s an older model, but Scarlett makes a bunch of high-quality audio interfaces, some of which are featured in Cult of Mac’s upcoming feature about the best audio interfaces for Mac. “I’ve had it for about a decade now. I used to make [YouTube] videos and used it to record my voiceovers,” Monk said when we asked about the Scarlett. “Now I mainly use it as a headphone amp for when I want to use my nice headphones (Sennheiser HD 598). It’s been pretty reliable, although the headphone jack is starting to get a little flaky over the years.”

A connector and converter for sound

An audio interface connects audio equipment to your Mac. And it converts analog audio signals from various sources, like microphones and musical instruments, into digital signals. That way, you can alter and record the sound using Digital Audio Workstation (DAW) software installed on your computer. The interface often handles digital-to-analog conversion (DAC), too, allowing you to listen through headphones or studio monitors, aka speakers. Many interfaces come preloaded with software, so shop carefully to get exactly what you want. In the case of Monk’s interface, it features two microphone inputs and two instrument inputs as well as four outputs for speakers, headphones and MIDI.

Scarlett 2i4 audio interface features:

  • Two natural-sounding Scarlett mic preamps with plenty of even gain; two instrument inputs. Two 1/4-inch balanced jack outputs to connect professional studio monitors; one headphones output with gain control; MIDI I/O
  • Conversion and sample rates up to 192kHz / 24 bit; low roundtrip latency for using your plug-ins in real time without the need for DSP.
  • Includes Pro Tools | First Focusrite Creative Pack and Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 2GB of Loopmasters samples, Choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration.
  • Compatible with Mac OS X 10.10 and higher and Windows 7 and up. Frequency response – 20 Hz – 20 kHz ± 0.1dB. Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
  • 3-year warranty
You can find all the gear in the gear list below, including the audio interface (pictured furthest left in the photograph below, under a mouse and a guitar picks).
Mac Studio and Studio Display refurbs in setup
This user said it’s hard to tell his Apple-refurbished Mac Studio and Studio Display aren’t new.
Photo: [email protected]

Shop these items now:

Focusrite Scarlett audio interface:

Computer:

Display and accessories:

Mechanical keyboard and mouse:

Connectivity:

Other:

If you would like to see your setup featured on Cult of Mac, send some high-res pictures to [email protected]. Please provide a detailed list of your equipment. Tell us what you like or dislike about your setup, and fill us in on any special touches, challenges and plans for new additions.

[ad_2]
Source Article Link
Categories
News

Petastream S20 Multi-Room Speaker: Elevate Your Home Audio Experience

Petastream S20

Sponsored:

Have you ever found yourself frustrated by the constant connection issues of Wi-Fi speakers? Or maybe tired of the never-ending cycle of app updates? We’ve uncovered the latest 2024 gadget, the Petastream S20 App-free Wireless Multiroom Speaker, which addresses these concerns. Ditch the hassle of sign-ups and passwords; this speaker offers straightforward Bluetooth connectivity, allowing you to link up to five speakers simultaneously for unmatched sound quality.

The S20 integrates with a SKAA-compatible protocol, ensuring high-quality, low-latency audio connections and flawless synchronization across speakers. This avoids common wireless interference and delays. The best part is that the S20 can connect seamlessly with SKAA-enabled devices, such as Soundboks speakers, offering smooth cross-brand compatibility. This broadens its appeal without restricting users to a single brand ecosystem.

Besides the features mentioned, Petastream innovatively transforms the S20 speaker into an intercom, capable of supporting conversations through three channels. This patented blend of speaker and intercom features is designed for seamless audio and communication in large areas or across multiple rooms.

The Petastream S20, an App-free Wireless Multiroom Speaker, is listed at USD 249. Exclusive discounts on Indiegogo are now available, ranging from USD 161-199 per speaker through Super Early Bird specials for this incredible project. This is approximately equivalent to GBP 127.8-198.13 (actual amount subject to the exchange rate at the time of the Indiegogo campaign transaction), offering a substantial discount of UP TO 35% off the list price.

Elevating Spaces with Petastream S20: innovative tech for entertainment & communication.

The Petastream S20 speaker, with its user-friendly tech, is ideal for parties, pleasing both hosts and guests. It offers an extensive wireless range—up to 180 m/590 ft outdoors and 20-30 meters (65-98 feet) indoors, with performance depending on the environment. Its straightforward interface allows guests to easily play their favorite songs without complex setups. Party attendees won’t need to join a ‘Family group’ to use the speakers; just a simple Bluetooth connection enables music playback throughout the house, adding to the convenience and party atmosphere.

For restaurant owners and food truck operators, the Petastream S20 Multi-room Speaker can elevate your business. Offering easy connectivity and an intercom feature, it keeps your customers entertained and informed as they await their meals. Say goodbye to shouting and missed orders; welcome great music and hassle-free communication instead. It enables seamless communication from the counter to the kitchen, significantly improving the dining experience.

Uncover the Features That Distinguish Petastream S20 Speaker

The S20 speaker delivers a smooth and seamless audio experience, not only by eliminating the need for complicated apps but also by featuring an intuitive one-touch panel that’s practical and user-friendly for people of all ages. This panel facilitates easy switching between transmitter and receiver modes, allowing access to all functions. With versatile connectivity options like Bluetooth 5.0, AUX-in, and compatibility with the SKAA audio transmission protocol, the S20 makes setting up your music network quick and effortless to get started.

Petastream S20

 

Equipped with two full-range drivers, the Petastream S20 features integrated dual 15W speakers that produce clear, balanced stereo sound with minimal distortion. Its audio EQ is finely tuned by professional audio experts, guaranteeing high-fidelity sound quality across all volume levels. With the ability to toggle between left, right, and stereo channels, the S20 lets you experience the clear and distinct sounds of different rhythms and vocals, creating an immersive experience.

Petastream S20

 

The S20 streamlines the audio experience with easy setup and no network constraints, ensuring flexible placement. Just plug it into power, connect via Bluetooth with a button press, and link up to five speakers through the transmitter and the receiver mode to transform any area into a personal DJ booth, home theater, or enhance commercial venues. Forget the hassle and cost of multiple audio sources and professional setup—S20 offers the ease of single-click functionality from its physical buttons.

Petastream S20

 

The Petastream S20 redefines audio and communication in large spaces or multiple rooms. It features a unique, patented combination of audio and intercom technologies, facilitating seamless conversations. This innovation sets a new standard for integrating sound with communication, offering users a versatile and enriched audio experience.

Petastream S20

For a complete list of all available special pledges, stretch goals, extra media, and product specifications for the Petastream S20 App-free Wireless Multiroom Speaker, jump over to the official Petastream crowdfunding campaign page by checking out the link below.

Source Indigogo

Disclosure: “This is a sponsored post. timeswonderful has been compensated for this post.”

Filed Under: Sponsored





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.