Categories
News

World’s First Rugged Power Station! Blackview OSCAL Rolls Out Power Station PowerMax 3600 with Expandable Capacity from 3.6kWh to 57.6kWh, 3600W Output, and 24/7 UPS in 5-8ms Switchover.

Sponsored:

Blackview, founded in 2013, is an innovation-driven tech company with extensive industry experience in rugged smart devices. Over the past decade, Blackview has been breaking many new grounds in the rugged smart device field with a slew of industry firsts: the first rugged phone with thermal imaging-BV9800 Pro, the first rugged phone with night vision-BV8800, the first rugged phone with 40M laser rangefinder or 100-lumen flashlight-BV9300. Not to mention N6000, the first mini rugged phone, and the Active 8 Pro, the first rugged tablet. All of them are warmly welcomed and loved by people from over 80 countries worldwide.

Following years of remarkable success in the field of rugged smart devices, Blackview & OSCAL saw a spike in users’ demand for zero-cost energy (solar, hydro, wind) in response to the rising cost of electricity bills brought on by wars and ongoing power outages during peak seasons. Adhering to the determination to bring the comfort of modern civilization to the wilderness, OSCAL has launched PowerMax 700 and PowerMax 300 in the field of portable power stations, which immediately became well-known as top sellers among users worldwide. Drawing from their experience in rugged smart devices and portable power stations, their R&D team recently undertook a pioneering effort to integrate rugged capabilities from rugged phones into power stations. As a result, PowerMax 3600, the first rugged portable power station in the world was introduced.

Explore Further on YouTube.

Blackview OSCAL PowerMax 3600

What sets the PowerMax3600 apart from the rest? Insufficient battery capacity? Unlike others that only support 10 battery packs, PowerMax 3600 has been innovatively expanded with up to 15 battery packs, extending the battery capacity from 3.6 kWh to 57.6 kWh for up to 30 days of home backup. Prolonged charging times? Unlike others that require at least 1.5 hours in recharging, PowerMax 3600 initially charges at a maximum input wattage of 3600W, which can be charged to full in only 1.2 hours. High-power device charging? Unlike others that only support an output power of 3000W or less, PowerMax 3600 supports 3600W of output power, which is able to charge 99% of essential devices, including outdoor work tools like drills and chainsaws as well as home appliances like air conditioners and refrigerators. Multi-device charging? Unlike others with only 10 or fewer ports, the PowerMax 3600 supports up to 14 output ports to power all the devices required for the party. Short battery lifespan? Unlike others with NCM/NCA batteries, PowerMax 3600 adopts EV-class LiFePo4 batteries with a battery lifespan of up to 25 years, which is five times longer than NCM/NCA batteries. Slow switchover to backup power? Unlike peers that require 20-30ms for UPS switchover, PowerMax 3600 has achieved a tech breakthrough in ultra-fast UPS switchover of 5-8ms, which is twice as fast as other power station devices, ensuring uninterrupted use of essential devices like CPAP. Inconvenient in-unit control? PowerMax 3600 uses TI chips with a 10% faster button response speed than that of devices using Etron chips. Smart app control? PowerMax 3600 also supports remote control with smart app, so that the operation of the power station is under control regardless of distance.

Blackview OSCAL PowerMax 3600

First Attempt! Evolving from Rugged Phones to Rugged Power Stations

0.8m Vertically Drop-Proof & Splash-Proof & Dust-Proof & Anti-UV & Fire-Retardant

Drawing upon years of experience in creating rugged phones, Blackview is taking a groundbreaking step by incorporating the unbreakable features of rugged phones into rugged power stations. Concerns about accidental drops from grasps while removing Blackview OSCAL PowerMax 3600 from the car or stairs are allayed by its reinforced ABS+PC material construction, which makes it strong enough to withstand any adventure with up to 0.8m vertically drop-proofness. It can be used anywhere, from fishing on the edges of wet lakes to working in dusty building sites, because it effectively blocks the entry of certain solid particles and vertical splashes of water. Be it the exploration of Alaska’s glaciers or the vast Sahara deserts, Blackview OSCAL PowerMax 3600 remains unaffected by the most extreme temperatures from -20~55°C. (Ideal from -10°C to 45°C). Even in the midst of desert exploration, the PowerMax 3600’s Anti-UV feature protects it from fading and aging brought on by prolonged sun exposure, and its UL94V-0 flame-retardant case ensures that there is no risk of fires spread resulting from heat generation.

Not only does PowerMax3600, like many other power stations, offer five LED light modes for illumination while setting up tents, preparing food, or reading the map at night, but it can also be used to transmit more information by adjusting the brightness and flashing pattern using Morse code, which is especially useful to convey distress signals if users are separated from his partners in areas with no signal while exploring in the wilderness.

Blackview OSCAL PowerMax 3600

Expandable Power for Tailored-made Occasion, Luggage-like Design for Easy Movement

Support up to 15*Extra Batteries(3.6kWh/Per), Capacity From 3.6kWh to 57.6 kWh.

From outdoor portable power for camping or RVs to home backup power for short-term power outages caused by severe weather and long-term power outages caused by energy crises, the issue of insufficient battery capacity for home and outdoor backup power has long surrounded users. Compared to most competitors with fixed capacity, Blackview OSCAL PowerMax 3600 delivers an expandable capacity from 3.6kWh to 57.6 kWh, which is an absolute modular model that accepts up to 15*extra battery packs (3.6kWh/Per) to make full use of its potential for any situation. When used as a portable power source for outdoor activities like camping or tailgating, 3.6kWh is sufficient for 1-day usage. If it works as a backup power station for professional fields like disaster relief or street businesses, 28.8kWh is ready for 7-day usage. If the purpose of that is for whole-house backup power during ongoing power cuts, 57.6kWh is more than enough for up to 30-day usage if used 2kWh/day on average. Despite its outsized capacity, Blackview OSCAL PowerMax3600 spares users, especially the elderly, a world of hassle when moving it from one place to another place thanks to its luggage-like design with easy-to-pull handles and smooth-rolling wheels, which makes the next beach trips or mountain vacations more comfortable and more enjoyable.

Blackview OSCAL PowerMax 3600 When using a power station, the inability to operate high-power appliances and the limitation on charging multiple devices simultaneously have consistently troubled users. Whether it’s for RVs, travel trailers, or even at-home emergencies, Blackview OSCAL PowerMax 3600 is perfect for worry-free power supply with a massive 3,600W power output that can power 99% of the essential devices, handling power surges from professional tools for off-grid living like power drills and cutting machines to household essentials for home backup like microwaves, refrigerators, and air conditioners. In the case of an unplanned outage, all the charging outlet demands of the family party will be satisfied with 14 outlet sources –four AC outlets for charging the electricity grill, refrigerator, coffee maker, and sound system, one Anderson port for charging drones, two DC55521 ports for charging camping lights, six USB ports for charging cell phones, tablets, etc, and one cigarette lighter port for charging most of the in-vehicle devices.

Super-safe System for Any Risk, Long-Lasting Battery Life for Any Adventure

Advanced LiFePO4 Battery+Eightfold Safety Protection BMS+24/7 UPS with 5-8ms Switch

Safety and durability stand as top priorities of users when choosing a power station. Unlike some power stations with lithium ternary batteries on the market, Blackview OSCAL PowerMax 3600 combo relies on particularly robust and long-lasting LiFePO4 battery cells for an extended lifespan to remain 80% after 3,500 life cycles, equivalent to 25 years of usage if used once every two days, which is 4-6 times longer than those with NCM batteries. As safe as it is, it includes an eightfold protection battery management system (BMS). So any potential glitches, be it overheating, overload discharging, or over-voltage issues, can be promptly fixed. Plus the cooling system is enhanced with four 38mm smart temperature-activated fans that facilitate efficient heat dissipation by up to 40 ℃. What’s more, the high-temperature warning will be triggered at 55°C and the high-temperature overload protection will be activated at 58°C, protecting the device from damage by high temperature.

Blackview OSCAL PowerMax 3600

If the grid goes down while users are watching TV, cooking supper, or working from home, the 24/7 Uninterrupted Power Supply (UPS) system of Blackview OSCAL PowerMax 3600 won’t leave users groping in the dark for a flashlight. In as little as 5 ms, which is nearly 80% faster than peers with 20-30ms, it switches over to work as an emergency backup power, so users can hardly notice the slight flickering of the lights, delivering constant power to protect users’ computers from data loss and maintain uninterrupted operation of users’ fish tank, refrigerator, CPAP, and other essentials.

Zero-cost and Green Energy! Super-fast Recharging! Fuel up to 80% in Just 0.96Hrs

-Recharging Ways: AC/Solar/Car/Dual Charing (AC+Solar/Car )/Gas Generator/Lead-acid Battery/EV Charging Station/Wind Turbines Charging/Water Turbine Charging

The difficulties users encounter while recharging the power station might be the limitations in charging options and charging speed. Going beyond the conventional charging methods supported by most power stations on the market, such as AC charging, solar charging, car charging, and dual charging, PowerMax 3600 has been intentionally designed to accommodate more charging options including EV charging stations, gas generators, and lead-acid batteries. Aware of the soaring cost of fuel and electricity, PowerMax 3600 not only supports typical zero-cost green energy sources like the sun (solar charging) but also makes it easier to charge from wind (wind turbines charging) and water(wind turbines charging).

Blackview OSCAL PowerMax 3600

How to cushion soaring energy bills with Blackview OSCAL PowerMax 3600? Take solar charging as an example. By connecting with solar panels at 1600W solar input, it captures and converts the sunlight into ready-to-use solar energy in just 2.25 hours for later use when utility power costs a pretty penny during peak hours, saving up to $1612.8/Year for users. When paired with PV and AC input, it charges from 0% to 80% SOC at a rate of 3600W in just 0.96H, which means it can be fully charged during the luggage preparation without delaying the next trip. Besides, Blackview OSCAL’s solar panels PM100/PM200 are also available for purchase, which is exceptional in transformation efficiency of 21.7%-23%, allowing for a steady stream of 100W/200W to top up the battery. With a fold-and-go design, users can take them wherever they go whether it’s camping or adventuring.

User-friendly Control with Smart App+Eco-friendly Operation without Fumes & Noise

Power station users, especially elderly ones, often face inconvenience caused by unintuitive operations. Apart from featuring an oversized LCD display with easy-to-read font sizes, OSCAL PowerMax 3600 adopts thumb-sized buttons for controlling the device. All operations are just a touch away with the built-in TI chip that is 10% faster in button response time when compared to other devices using Etron chips. Also, Blackview OSCAL PowerMax 3600 utilizes a Smart app for remote control, where users can access to monitor and control remotely for ongoing management.

Unlike gas generators, it works without emitting toxic fumes or disturbing the peace, running as quietly as 62dB max(1.5M distance), making it usable in even confined spaces.

Blackview OSCAL PowerMax 3600

Shipping & Warranty & After Sales

Once released, users are anticipated to receive their orders within 7-10 days. Rest assured about any quality concerns— Blackview OSCAL guarantees a 4-year warranty with 24/7 online support as well as several offline service centers. Stay tuned for more updates.

Price & Availability

Get ready for the unveiling of Blackview OSCAL PowerMax 3600 on Indiegogo, starting from January 10th. Get yours for as low as $1799! More accessories such as battery packs, trolly, solar panels, car charging cables, and AC charging cables are also available. Don’t miss the bonus perks – all crowdfunding backers have a chance to unlock exclusive gifts.

Disclosure: “This is a sponsored post. timeswonderful has been compensated for this post.”

Filed Under: Sponsored





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

Writing books with AI and what you can expect

Writing books with AI and what you can expect

The world of book writing is being reshaped by the advent of artificial intelligence (AI). For those who are considering the use of AI in their writing endeavors, it’s important to grasp both the advantages and the challenges that come with this technological aid. Drawing from his experience of crafting “Heirs of Dracula,” a Gothic fantasy novel, the Nerdy Novelist explains more about the practicalities of integrating AI into the writing process and what you can expect during the process and afterwards.

For writers, the mental toll of crafting a book can be significant. However, AI can play a pivotal role in reducing this mental strain. Tools like Claude 2.0 are proving to be invaluable for writers who struggle with maintaining focus. These AI tools provide a supportive structure that can help writers keep their momentum and make the process more manageable.

Claude 2.0, in particular, is an AI model that has been tailored for fiction writing. While it’s not without its imperfections, it excels in helping to shape a story bit by bit. By feeding the AI snippets of your work, you can steer the narrative and ensure that the AI’s contributions align with your creative vision.

The process of writing books with AI

If you are interested in learning more about what you can expect from the process of writing books using artificial intelligence will be pleased to know that The Nerdy Novelist  explains more about his thoughts and process when using AI to write a book of approximately 50,000 words.

  • AI as a writing tool does not necessarily save time but reduces mental strain, making writing more accessible.
  • Claude 2.0 is currently the best AI model for writing fiction, though it is not without flaws. A better approach may be to write sections incrementally, starting with the author’s own text to guide the AI.
  • AI can compensate for a writer’s weaknesses and enhance their strengths.

Here are some other articles you may find of interest on the subject of improving your writing skills using AI :

AI can also be a powerful ally in balancing your writing skills. If you find certain aspects of writing, such as dialogue, to be challenging, AI can step in to create realistic character conversations. This was evident in the dialogue within “Heirs of Dracula.” By allowing AI to handle areas where you might not be as strong, you can focus on the parts of writing that play to your strengths, thereby improving the overall caliber of your work.

When it comes to managing word count, AI can be surprisingly effective. “Heirs of Dracula” reached a word count of just over 50,000 words, which is quite typical for a novel with a single narrative perspective. AI’s knack for streamlining could help keep your story tight and captivating for your audience.

The emotional satisfaction of completing a book with AI’s assistance cannot be overstated. For those who have faced hurdles such as writer’s burnout, finishing a full-length novel with the support of AI can reignite a passion for writing and motivate you to embark on new creative projects.

AI’s usefulness extends beyond the initial writing phase and into editing and publishing. AI can enhance your manuscript, ensuring it’s polished before publication. While the final product may show signs of AI’s involvement, it can still emerge as a refined and engaging narrative. Once your book is complete, it can be shared with readers worldwide through platforms like Amazon and Barnes & Noble, who are always on the lookout for new stories in genres like Gothic fantasy.

Things to consider when writing books with AI

  • Mental Strain Reduction: Recognize that AI can significantly alleviate the mental toll of writing, especially beneficial for those dealing with focus-related challenges such as ADHD, depression, or autism.
  • Role of AI in Fiction: Understand that AI tools like Claude 2.0 are specifically tailored for fiction writing. They excel in helping to shape a story incrementally, complementing the author’s creative vision.
  • Creative Collaboration: Use AI as a collaborative tool to steer the narrative. Feed it snippets of your work to ensure AI contributions align with your story’s direction and style.
  • Skill Balancing: Employ AI to bolster areas of writing where you might be less confident, like dialogue creation, allowing you to focus on your strengths.
  • Managing Word Count: Leverage AI’s capability to streamline your story, aiding in maintaining a suitable word count and keeping the narrative tight and engaging.
  • Emotional Satisfaction: Acknowledge the emotional fulfillment that comes from completing a book with AI’s assistance, which can be particularly motivating for those who have experienced writer’s burnout.
  • Editing and Publishing Support: Utilize AI not only in the writing phase but also for editing and refining your manuscript before publication.
  • Awareness of AI Influence: Be conscious that while AI can enhance your manuscript, the final product may reflect AI’s involvement. Ensure that your personal touch and authorial voice remain dominant.
  • Global Reach: Consider leveraging platforms like Amazon and Barnes & Noble for publishing, as they are receptive to AI-assisted works, especially in genres like Gothic fantasy.
  • Evolving Opportunities: Stay informed about the continuous advancements in AI technology, which will expand the possibilities for innovative storytelling.
  • Ethical and Creative Considerations: Be mindful of the ethical implications and the balance between AI assistance and original human creativity in your work.
  • Audience Perception: Anticipate and understand how readers might perceive a book written with AI assistance, and be prepared to address questions regarding the authenticity of the creative process.

The integration of AI into the realm of book writing is altering the landscape of storytelling. It offers mental relief, complements your writing style, and can lead to a rewarding finished product. As AI technology continues to evolve, the opportunities for writers to innovate in their storytelling will only grow.

Filed Under: Guides, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

The Volkswagen Golf is 50 Years Old in 2024

No matter which generation – the secret of success was and still is the sum of all its characteristics. This is because the Golf has always been a perfect companion for everyday life, embodying versatility, functionality, reliability and quality. Over the decades, the portfolio has been expanded to include further variants: whether Golf GTI, Golf Cabriolet or Golf Variant, or many others. With each new model generation, state-of-the-art technologies, safety concepts and convenience features have been incorporated into the compact class. The Volkswagen Golf has thus democratised not just technologies such as the monitored catalytic converter and anti-lock braking system, but also airbags, cruise control and electronic assist systems as well as mild and plug-in hybrid drives.

In the anniversary year 2024, Volkswagen will present the evolutionary development of the eighth Golf generation. It will impress with visually refined features, new assist systems and powertrains, and also next-generation infotainment systems and software. The world premiere of the new Golf is just a few weeks away, with pre-sales scheduled for spring 2024.

Categories
News

Complete PCIe 6.0 subsystem solution from Alphawave Semi & Keysight

Complete PCIe 6.0 subsystem solution

Alphawave Semi and Keysight Technologies have joined forces to create a cutting-edge solution for the latest PCIe 6.0 standard. This collaboration is a response to the growing need for faster data transfer rates, which are becoming increasingly important for the operation of sophisticated AI and high-performance computing systems. The new PCIe 6.0 standard is set to dramatically increase data transfer speeds to 64 gigatransfers per second, a notable jump from the previous version.

The partnership leverages Alphawave Semi’s expertise in PHY and Controller Device technology and Keysight’s Protocol Exerciser to achieve a significant breakthrough in data rate link negotiation. This is a crucial step for the implementation of PCIe 6.0. Alphawave Semi’s inclusion on the PCI-SIG 5.0 Integrators list emphasizes their dedication to adhering to rigorous industry standards, which is essential for the rapid adoption of the new technology.

One of the standout accomplishments of this collaboration is Alphawave Semi’s successful establishment of a CXL 2.0 link, which is a promising sign for future enhancements in data center efficiency. This is particularly relevant for the smooth operation of data centers, where cache coherency is a key factor.

PCIe 6

PCI Express (PCIe) 6.0 is the latest version of the PCI Express interface standard, which is widely used for high-speed data transfer in computers and servers. This version marks a significant advancement from its predecessor, PCIe 5.0, in several key areas:

  • Data Transfer Speed: PCIe 6.0 doubles the data transfer rate of PCIe 5.0, reaching up to 64 gigatransfers per second (GT/s) per lane. This translates to raw data rates of around 128 gigabytes per second (GB/s) in a x16 configuration, commonly used for graphics cards and high-end storage devices.
  • PAM4 Encoding: One of the most notable changes in PCIe 6.0 is the shift from Non-Return-to-Zero (NRZ) encoding to Pulse Amplitude Modulation with 4 levels (PAM4) signaling. PAM4 allows for more data to be transmitted with the same number of clock cycles by using four voltage levels instead of two, effectively doubling the bandwidth.
  • Forward Error Correction (FEC): PCIe 6.0 introduces Forward Error Correction, a significant enhancement for data integrity. FEC can detect and correct errors within the data stream, improving the reliability of high-speed data transfers, which is crucial for maintaining data integrity at higher speeds.
  • Low-Latency Flow Control Unit (FLIT): PCIe 6.0 uses a flow control unit called FLIT (Flow Control Unit-based encoding) to maintain low latency. FLIT-based encoding helps in managing the increased complexity of PAM4 signaling and FEC, ensuring that the latency doesn’t increase significantly despite the higher speeds and more complex encoding.
  • Backward Compatibility: Like its predecessors, PCIe 6.0 maintains backward compatibility with previous generations of PCIe. This means that devices designed for PCIe 6.0 can still operate with PCIe 5.0, 4.0, etc., hardware, albeit at the lower performance levels of the older generation.
  • Applications: The increased bandwidth and improved data integrity of PCIe 6.0 are particularly beneficial for applications that require high data throughput, such as data centers, artificial intelligence, machine learning, high-performance computing, and advanced networking systems.

PCIe 6.0 is an important development for future computing applications, offering significant improvements in speed and efficiency. Its adoption will likely be gradual, as it requires both hardware and software support to fully utilize its capabilities.

PCIe 6.0 Subsystem Solution

The role of test and measurement is crucial when introducing new technologies to ensure that products are interoperable and ready for widespread use. Keysight Technologies has pointed out the importance of PCIe in scaling AI and managing complex workloads. A significant technical shift in PCIe 6.0 is the move from NRZ signaling to Pulse Amplitude Modulation 4-level (PAM4). This change addresses challenges related to signal integrity and protocol, while also maintaining backward compatibility with previous PCIe generations. The introduction of Forward Error Correction (FEC) in FLIT-mode transactions is another key innovation, allowing PCIe 6.0 to handle higher bit error rates and ensure data integrity.

Alphawave Semi has showcased the effectiveness of FLIT-mode transactions on their PCIe 6.0 64 GT/s subsystem silicon, demonstrating the solution’s power efficiency, low latency, and reliability. Their PAM4 SerDes IP showcases their ability to provide leading-edge connectivity solutions.

Looking ahead, Alphawave Semi’s PCIe 6.0 Subsystem has the potential to support CXL 3.0, which could further enhance memory coherency in data centers and solidify the company’s position as a leader in high-speed connectivity for demanding computing environments. The joint efforts of Alphawave Semi and Keysight Technologies mark a pivotal step in the evolution of PCIe technology. This partnership is paving the way for a new era of high-speed connectivity that will be instrumental in driving forward the next generation of AI and high-performance computing developments.

Filed Under: Gadgets News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

MINISFORUM MS-01 Intel PC Mini WorkStation

MINISFORUM Mini WorkStation MS-01

MINISFORUM has unveiled its new Mini WorkStation MS-01, a compact yet powerful device designed to meet the needs of tech enthusiasts and professionals. This workstation is now available for pre-order and is built to handle high-performance tasks, including gaming and demanding network and storage applications. The MS-01 features a high-performance Intel 13th generation i9 CPU, offering excellent expandability with support for up to 24TB of SSD storage.

MINISFORUM MS-01 specifications

The heart of the MS-01 is its high-performance processors, offering a choice between the Intel Core i9-13900H and the i9-12900H. These processors feature 14 cores and 20 threads, with a base frequency of 2.6 GHz that can turbo boost up to 5.4 GHz. This ensures that even the most demanding software runs smoothly. The integrated 96EU Intel Iris Xe graphics, with speeds up to 1.5 GHz, provide sharp and smooth visuals for all computing needs.

Networking capabilities are a standout feature of the MS-01, boasting transfer speeds of up to 65 Gbps, making it the fastest Mini PC in MINISFORUM’s range. It includes two 10G SFP+ ports and two 2.5G RJ45 ports, which allow for high-speed network connections. The workstation also has two USB4 interfaces that support 40 Gbps transfers, making it easy to move large files quickly.

MS-01 Intel PC Mini WorkStation connectivity and storage

When it comes to storage, the MS-01 offers ample and flexible options. It has three M.2 NVMe SSD slots and one U.2 NVMe hard drive expansion slot. The workstation also supports Raid0 and Raid1 configurations, which can be optimized for performance or data redundancy.

MINISFORUM MiniWorkStation MS-01 connectivity

The MS-01 is designed to be scalable to meet your changing needs. It includes a standard PCIe x16 slot, which is compatible with NVIDIA RTX A2000 professional graphics cards, for those looking to boost their graphics performance. The workstation can support up to 64 GB of RAM through two laptop memory slots.

To ensure that the MS-01 operates at its best, it features an efficient cooling system. This system includes a high-speed, low-noise fan and a separate cooling fan for the hard drive, maintaining stability even under heavy workloads. The workstation is also equipped with Intel vPro technology, which includes Intel AMT for remote system management. This allows for updates and troubleshooting even when the operating system is not running.

MS-01 specifications:

– Intel Core i9-13900H and i9-12900H processors
– Intel Iris Xe graphics
– Network transfer speeds up to 65 Gbps
– 10G SFP+ ports and 2.5G RJ45 ports for high-speed network connections
– USB4 interfaces with up to 40 Gbps transfer speed
– M.2 NVMe SSD slots and U.2 NVMe hard drive expansion slot for storage
– Raid0 and Raid1 configurations for performance or backup
– PCIe x16 slot compatible with NVIDIA RTX A2000 professional graphics cards
– Laptop memory slots supporting up to 64 GB
– Robust cooling system with high-speed, low-noise fan
– Intel vPro technology support for remote management with Intel AMT

The versatility of the MS-01 is one of its most notable features. It can function as a mini desktop, an advanced network router, or a Thunderbolt storage device. With an additional graphics card, it becomes a mini graphics workstation, suitable for a variety of professional uses.

MINISFORUM MS-01 internal components

Priced starting at $549 USD, the MINISFORUM Mini WorkStation MS-01 is a high-performance, versatile solution for those who need the power of a workstation without the bulk. Its combination of processing power, advanced networking, extensive storage, scalability, and remote management features make it an appealing choice for gamers, creative professionals, and anyone requiring a fast and reliable network and storage system.

Filed Under: Hardware, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

50 Amazing custom GPTs and how to make a custom GPT yourself

50 Amazing custom GPTs and how to make a custom GPT yourself

Last year OpenAI launched its new ChatGPT  large language model enabling, artificial intelligence (AI) to transform our lives and the way we interact with digital platforms. Among the most innovative advancements in AI in recent months are the launch of custom Generative Pre-trained Transformers (GPTs) by OpenAI. Taking the form of tailored AI models that enhance productivity and creativity across various industries. Unlike standard chatbots, these AI tools are designed to understand and respond to specific user needs, making them incredibly versatile and valuable.

Custom GPTs are at the forefront of AI innovation, offering advanced capabilities that surpass traditional chatbots. For instance, the Storyteller GPT can craft captivating narratives from mere images, while the Transcriber GPT transcends language barriers by providing video transcriptions in multiple languages. These AI models are not just reshaping our professional lives; they’re also enriching our hobbies and simplifying daily tasks.

The popularity and utility of these GPTs are reflected in their online presence, with platforms like GPTs Hunter serving as a gateway to discovering the perfect AI model for your needs. Among the diverse applications, the SEO Analyzer GPT stands out for its ability to enhance blog posts for better search engine visibility. Similarly, the Cosmic Dream GPT can turn simple prompts into breathtaking visual art, and Opa GPT offers valuable insights for music enthusiasts, particularly those using the OP-1 synthesizer.

50 Custom GPT AI models

Check out 50 amazing custom GPTs in this comprehensive list created by AI Mastery listing everything from how to fix your bike to choosing the best wine.

Here are some other articles you may find of interest on the subject of

These top 50 custom GPTs are redefining our engagement with technology, making a broad spectrum of tasks more accessible and enjoyable. Whether you’re looking to enhance your website, master a new skill, or streamline your daily routine, there’s a custom GPT designed to help you reach your goals. With their specialized features and growing popularity, these AI models are essential tools for anyone looking to leverage technology for personal or professional advancement.

How to make a custom GPT using ChatGPT

Creating a custom GPT AI model using OpenAI’s ChatGPT is a process that can be tailored for specific tasks or topics. This customization can be as simple or complex as needed, catering to a wide range of applications from language learning to technical support.

OpenAI provides a straightforward approach for Plus and Enterprise users to create these models. Here’s a step-by-step guide:

1: Accessing the GPT Editor

  • Visit OpenAI’s GPT Editor or navigate through your account by selecting your name and then “My GPTs.”

2: Creating Your GPT

  • Choose the “Create a GPT” option.
  • In the Create tab, interact with the GPT Builder. You can provide instructions like, “Make a creative who helps generate visuals for new products” or “Make a software engineer who helps format my code.”

3: Configuring Your GPT

  • Under the Configure tab, name your GPT and set its description.
  • Choose the actions your GPT should take, such as web browsing or creating images.

4: Publishing Your GPT

  • Once your GPT is ready, select “Publish” to make it available. You can also choose to share it with others.

Advanced Settings in the GPT Editor

The GPT Editor offers more detailed customization options:

  • Create Tab: Allows you to communicate with the GPT Builder to construct your GPT.
  • Configure Tab: Here, you can add an image to your GPT, either by creating one using the GPT Builder or uploading your own. You can also provide detailed instructions or guidelines for your GPT’s behavior, functionalities, and behaviors to avoid. This tab allows you to set Prompt Starters, add Knowledge for your GPT to reference, enable new capabilities like Web Browsing, DALL·E Image Generation, and Advanced Data Analysis, and create Custom Actions. For the latter, you can make third-party APIs available to your GPT or import actions from an OpenAPI schema.
  • It’s also worth knowing that you can upload currently a maximum of 20 files to a custom GPT.

By following these steps, users can create a custom GPT AI model tailored to their specific needs, with a range of functionalities and behaviors. This process opens up a world of possibilities in AI customization, allowing for a more personalized and efficient use of GPT technology. For more information on how to make a custom GPT yourself jump over to the official OpenAI support website.

Image Credit: AI Mastery

Filed Under: Guides, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

New Samsung Odyssey Gaming Monitors launched at CES

Samsung Odyssey Gaming Monitors

Samsung has announced that it is expanding its range of Samsung Odyssey Gaming Monitors and these new devices have been made official at this year’s CES. The range includes the Odyssey OLED G9, Odyssey OLED G8, and the Odyssey OLED G6.

The new OLED models deliver on the performance and visual clarity gamers look for in their monitors and include the Odyssey OLED G9 (G95SD model), Odyssey OLED G8 (G80SD model) and the Odyssey OLED G6 (G60SD model).

The Odyssey OLED G9 is a 49” curved ultra-wide gaming monitor with DQHD (5,120 x 1,440) resolution, a 32:9 aspect ratio and other upgraded features. The Odyssey OLED G8 is the first flat 32” Samsung OLED gaming monitor with 4K UHD (3,840 x 2,160) resolution and a 16:9 aspect ratio. Both monitors have a 240Hz refresh rate and 0.03ms GTG response time.1 The Odyssey OLED G6 is a 27” QHD (2,560 x 1,440) monitor which supports a 16:9 aspect ratio, 360Hz refresh rate and 0.03ms GTG response time.

“Along with game genres, gaming platforms are getting more diverse,” said Hoon Chung, Executive Vice President of the Visual Display Business at Samsung Electronics. “Samsung’s new OLED Odyssey gaming monitors will empower gamers with more immersive game environments and innovative technology that personalize their gaming experiences — meeting and exceeding their evolving needs.”

You can find out more details about the new range of Samsung Odyssey Gaming Monitors over at Samsung’s website at the link below, as yet there are no details on pricing for the new models.

Source Samsung

Filed Under: Displays News, Gaming News, Technology News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

Seamless live speech language translation AI from Meta

AI News Live speech language translation AI and more

One of the most exciting recent AI developments in the last few weeks is the new live speech translator called Seamless introduced by Meta. This cutting-edge tool is changing the game for real-time communication, allowing you to have conversations with people who speak different languages with almost no delay. Imagine the possibilities for international business meetings or casual chats with friends from around the globe. Meta explains more about its development

Seamless, the first publicly available system that unlocks expressive cross-lingual communication in real time. To build Seamless, we developed SeamlessExpressive, a model for preserving expression in speech-to-speech translation, and SeamlessStreaming, a streaming translation model that delivers state-of-the-art results with around two seconds of latency. All of the models are built on SeamlessM4T v2, the latest version of the foundational model we released in August.

Meta Seamless live voice translation AI

SeamlessM4T v2 demonstrates performance improvements for automatic speech recognition, speech-to-speech, speech-to text, and text-to-speech capabilities. Compared to previous efforts in expressive speech research, SeamlessExpressive addresses certain underexplored aspects of prosody, such as speech rate and pauses for rhythm, while also preserving emotion and style. The model currently preserves these elements in speech-to-speech translation between English, Spanish, German, French, Italian, and Chinese.

But AI’s advancements doesn’t stop at language translation. It’s also making strides in enhancing the quality of our digital interactions. For instance, an open-source AI speech enhancement model is now available that rivals Adobe’s podcast tools. This AI can filter out background noise, ensuring that your voice is heard loud and clear, no matter where you are. It’s a significant step forward for anyone who needs to communicate in less-than-ideal environments.

The personal touch is also getting a boost from AI. New technologies now allow you to create customized figurines that capture your likeness. These can be used as unique social media avatars or given as personalized gifts. It’s a fun and creative way to celebrate individuality in a digital age.

For the intellectually curious, AI is offering tools like Google’s DeepMind’s Notebook LM. This isn’t just a digital notebook; it’s a collaborative research tool that can suggest questions and analyze documents, enhancing your research and brainstorming sessions. It’s like having a smart assistant by your side, helping you to delve deeper into your work.

AI translation demonstrated

Check out a demonstration of the  Seamless AI translation service from Meta and other AI news and advancements thanks to The AI Advantage who has put together a selection of innovations for your viewing pleasure.

Here are some other articles you may find of interest on the subject of AI and creating AI projects and automations:

AI News in the healthcare sector, includes new advances for ChatGPT enabling it to now interpret blood work and DNA tests, providing medical advice and health recommendations that are tailored to individual needs. This could revolutionize patient care by offering insights that are specific to each person’s health profile.

Content creators are also seeing the benefits of AI. New video creation methods are advancing rapidly, with technologies that can generate lifelike human images in videos. This enhances the realism and engagement of digital content, making it more appealing to viewers.

The art world is experiencing its own AI renaissance. An AI art generator named Leonardo now includes an animation feature, allowing artists and animators to bring static images to life with ease. This opens up new possibilities for creativity and expression, making animation more accessible to a broader range of artists.

For video producers, making content accessible to everyone is crucial. An AI tool on Replicate now provides captioning services for videos, ensuring accurate transcription and synchronization of words. This not only makes content more inclusive but also expands its reach to a wider audience.

These innovations are just a few examples of how AI is being integrated into our daily lives. With each passing week, new AI applications emerge, offering more convenience, personalization, and enhanced communication. As we continue to witness the rapid growth of AI technology, it’s clear that its potential is boundless. Keep an eye out for the next wave of AI advancements—they’re sure to bring even more exciting changes to our world.

Filed Under: Technology News, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

Amazing bionic arm controlled by thought and AI

Amazing bionic controlled by thought and AI

In a remarkable turn of events, Sarah has overcome the odds after a devastating train accident that resulted in the loss of her right arm and leg. Her life has been transformed by an AI-powered bionic arm that has given her a new lease on independence. This high-tech prosthetic is sensitive to the muscle movements in Sarah’s remaining limb, and is controlled by thoughts and artificial intelligence. Allowing her to perform tasks with an impressive level of precision that closely resembles natural human motion. Watch the demonstration video below to learn more about the technology that is currently under development.

The cutting-edge technology behind Sarah’s new arm includes a rotatable wrist and the ability to apply a significant amount of force, features that replicate the functionality of a real limb. The arm is equipped with 16 electrodes that pick up on the subtle muscle twitches in Sarah’s residual limb. These signals are then converted into a variety of actions by the prosthetic. The artificial intelligence is crucial in this process, as it records Sarah’s movement patterns, predicts her intentions, and learns from her to improve the arm’s responsiveness.

Bionic arm powered by users mind

Here are some other articles you may find of interest on the subject of artificial intelligence :

Sarah’s journey to mastering the use of her bionic arm has been intense and required a lot of dedication. She spent countless hours in rehabilitation, working closely with experts to perfect the way she communicates with her new limb. This training is vital for the AI to fine-tune its interpretation of her commands, which is key to making the use of the arm feel more natural and integrated into her everyday life.

The impact of the bionic arm on Sarah’s daily activities has been profound. Tasks that were once challenging due to her disability are now within her reach. She can now prepare meals, type, and participate in a variety of activities that were difficult before. This advancement has not only increased her independence but has also significantly boosted her confidence.

Looking ahead, Sarah is excited about the potential for future AI improvements that could enhance the functionality of her bionic arm even further. She hopes to one day regain the ability to ride a bike and drive, activities that symbolize freedom for her. As AI technology continues to progress, there is a growing sense of optimism for individuals like Sarah, who may be able to experience a greater sense of normalcy with their prosthetic limbs.

Sarah’s story is a testament to the powerful combination of human resilience and technological innovation. Her experiences with the AI-powered bionic arm highlight the incredible potential for technology to change lives and expand the limits of what is achievable for those who rely on prosthetics.

Image Credit : BBC

Filed Under: Technology News, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.

Categories
News

Articul8 generative AI company launched by Intel and DigitalBridge

Articul8 generative AI company

In the fast-paced world of generative AI, businesses are constantly seeking ways to stay ahead of the curve. Articul8 AI, Inc. is making waves with its new software platform, GenAI, which promises to bring a fresh perspective to the use of artificial intelligence in the enterprise sector. This platform is the result of a collaboration between tech giant Intel and DigitalBridge Ventures, and it’s designed to deliver speed, security, and cost-efficiency like never before.

Articul8 is a Generative AI (GenAI) enterprise software company focused on helping organizations solve the world’s toughest problems. Articul8’s full-stack, vertically-optimized GenAI software platform enables companies to build, deploy and manage enterprise-grade, secure GenAI applications rapidly and cost-effectively.

The GenAI platform is the centerpiece of Articul8 AI’s offerings, with a strong emphasis on data security, a top priority for any business. Companies have different needs when it comes to infrastructure, and GenAI is built to accommodate that diversity. Whether a business prefers cloud-based solutions, on-premises setups, or a mix of both, GenAI ensures that their sensitive data remains protected.

Intel Articul8 generative AI

Intel’s cutting-edge technology forms the foundation of the GenAI platform, ensuring it works seamlessly with Intel hardware. However, the platform’s design is versatile, supporting a range of hybrid infrastructures. This makes GenAI a suitable choice for various industries, including finance and telecommunications, where the demands for AI solutions are particularly high.

The leadership of Articul8 AI is spearheaded by Arun Subramaniyan, whose experience as a former Intel executive is invaluable. Under his guidance, the company is steering towards a future where GenAI becomes an essential tool across different sectors. The platform’s scalability and adaptability have been proven in early deployments, indicating its potential to revolutionize industry-specific applications. Here are some other articles you may find of interest on the subject of generative AI.

Articul8 AI’s financial stability is robust, with significant investments from DigitalBridge Ventures, Intel, and other venture capitalists. This financial support is a testament to the market’s belief in Articul8’s strategic vision and the GenAI platform’s capabilities.

A key aspect of Articul8 AI’s approach is its collaboration with the Boston Consulting Group. This partnership is critical for integrating the GenAI platform into the business strategies of clients. It ensures that the technology not only enhances current operations but also paves the way for new business opportunities.

Despite its collaborations, Articul8 AI maintains its independence, which is crucial for its ability to quickly adapt its market strategy and grow its offerings within the GenAI ecosystem. This independence allows the company to remain agile and responsive to the evolving needs of enterprise customers.

Articul8 AI, supported by Intel’s technology and DigitalBridge Ventures’ investment, is set to make a significant impact on the enterprise AI market. The GenAI platform, with its focus on data security, flexible deployment options, and optimization for Intel hardware, is well-prepared to serve a wide range of industries. The leadership of Arun Subramaniyan, the strategic partnership with Boston Consulting Group, and the company’s ability to operate independently are all crucial to Articul8’s goal of leading the way in the application of generative AI within the enterprise realm.

Filed Under: Technology News, Top News





Latest timeswonderful Deals

Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, timeswonderful may earn an affiliate commission. Learn about our Disclosure Policy.